Undo the bolts and take it out. It helps to remove the battery in order to give you some working room as the bottom ones are in a tight spot. We have more info on our enthusiasts forum at
www.trailvoy.com
Remove wiring harnesses, unbolt it, remove from engine. Install new alternator, apply tension using bar, bolt it, hookup wiring harnesses.
The 1991 Blazer has a current draw causing the wire to burn. You will need to trace the wiring out to find what is drawing too much current.
Remove winshield wiper assembly to remove altrnator,i know ive done it
on the car its fairly simple disconnect battery. use 3\8 drive ratchet put in the auto tensioner arm for serpentine belt and lift up remove belt. remove bolts going to wish bone mounts at front of engine. tilt engine forward. disconnect wire harness to alternator{should be 10mm} remove bolt from bracket at bottom of alternator. tilt alternator up and remove bolt from bottom back. hope this helped.
To test the alternator if funds are low, let the motor idle and remove the negative battery cable, if the motor dies its probably the alternator.
Remove the alternator belt by loosening the tensioner pulley. Remove the wiring from the alternator. Remove the retaining bolts to the alternator. Reverse the process to install the new alternator.
An alternator from a 2000 Chevy blazer will fit a 2002 S10 blazer with a little fabrication.
To change the alternator in your 1986 Chevrolet Celebrity: 1, Remove the battery ground cable. 2. Unplug remove the wiring from the alternator. 3. Loosen the bolts that hold the alternator in place. Remove the drive belt. 4. Remove the bolts and the alternator will pull out. Reverse the process to reinstall the new alternator.
Inside the voltage regulator on the alternator.
first unhook the battery, then release the automatic belt tensioner and remove the belt, then unbolt the alternator and disconnect the wiring from the alternator....to reinstall, reverse the removal procedure
How to Remove the Steering wheel From a Chevy Blazer 2001
The alternator is failing.
how do you remove the dashboard of a 2002 Chevy blazer
Remove the belt from your 2002 Chevy Cavalier alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
Remove the belt from your 1999 Chevy Malibu alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
Remove the belt from your 1993 Chevy G 20 alternator. Remove the alternator wiring harness. Remove the retaining bolts from the alternator. Reverse the process to install the new alternator.
1st remove negative battery cable from battery. then remove electrical connectors from alternator with ratchet, rotate tentioner pully to remove belt. (near top/center of belt) remove support bracket and mounting bolts and it's off.