remove lower covers under steering wheel, two screws are hidden behind heating and ac trim panel. remove the bolts to the bracket holding the steering column up. lower the steering column. the switch is located on the steering shaft underneath the dashboard instrument cluster.
Well funny you should mention this. I am taking mine to Pic N Pull tomarrow to have it donw. There is a mechanic that will do it for $100. They have a lot of good mechanics out there ask around. Otherwise the shop wanted $250 to $350. Good Luck.
I have the same problem with my 1989.
The best I have found so far is this:
How_do_you_change_an_ignition_Switch_on_a_90_Buick_Century
How to change ignition switch in a 1979 el camino.
switch itself or key cylinder?
With care and precision.
No, not if it is not defective. If the ignition switch is defective then that is all you need to replace.
When you determine that it is defective.
take it to the dealer and wait for the bill $$$$$$$$$$.
how do you replace a ignitionswitch tumbler 1991 buick skylark
Replace your ignition lock assembly.
You do not need a key to replace the ignition switch.
You can remove the 1999 Cadillac Deville ignition switch by removing the retaining ring. The retaining ring will be at the top of the ignition switch. Pull the ignition switch out. Remove the wiring harness from the back of the switch. Reverse the process to install the new switch.
How do you replace the ignition switch on a 2000 ford expedition?
how to replace an ignition switch for 2005 chevy equinox
Replace ignition switch for 1993 buick century?
No, not if it is not defective. If the ignition switch is defective then that is all you need to replace.
Ignition switch 2002 Chrysler sebring. Original key will not turn? Is there a fuse or replace the switch?
remove ignition switch 92es300
the ignition switch is bad. you have to replace the ignition switch and you will have to have a new key made with it. i just replaced it in my 1992 seville. that will solve your problem.
How do remove and replace the ignition switch of a 1983 Oldsmobile Regency?
Remove the ignition switch retaining ring. Pull the ignition switch out. Remove the wiring harness from the back of the ignition switch. Reverse the process to install the new ignition switch.
1997 Toyota Camry ignition switch removal