0
What else can I help you with?
What is the bell housing?
It is located between the back of the engine and the transmission. It houses the flywheel and clutch if it is a standard or the flex plate and the torque converter if it is an automatic transmission.
Can you put a engine from a car with a automatic transmission in a car with a standard transmission?
Yes, but you have to remove the automatic transmission housing, and you have to replace the Torque Converter with a standard transmission clutch that matches the type of transmission with which you are mating the engine.
How do you change a torque converter in 1979 ford f-150?
Pull the transmission and change it. The torque converter is inside the bell housing on the front of the transmission. Only way to get it out is to pull the transmission.
Is their any difference between a Dana 60 and a spicer axle?
yes there is a difference one is made by spicer and one is made by Dana neither are interchangeable,as the splines are different. you would have to change entire diff housing and differential
Where is the starter on a 1993 Blazer 350 engine?
The starter location on all Dodge Dakota engines is on the driver's side rear of the engine, low down and bolted to the transmission bellhousing. It will be cylindrical in shape and the positive (red/+) battery cable will run directly to it.
What is the difference between a clt750drd and a ht750 drd Allison transmission?
The CLT has a rear side mount provision on the low clutch housing. The HT does not.
Where is a bell housing on a 1999 grand Cherokee Laredo?
The bell housing is between the engine and the transmission.
Where is starter solenoid on 1991 buick regal 3.8 engine?
between the transmission and the transmission housing
What is the difference between American and Vietnam housing?
nffiukdsfcsyai
Where is the bell housing to disengage the clutch?
The bell housing surrounds the clutch assembly. Mounted between the engine and the transmission.
What is the main difference between a tepee and a lodge?
The main difference is that the teepee is temporary housing and meant to be moved. A lodge is permanent housing.
Where is the transmission housing for 1991 ford E350?
The transmission housing for a 1991 E350 is bolted to the rear of the engine. The entire transmission case is considered the housing.
Is there a spacer in between the fly wheel and starter?
I think it's depending on the vehicle, there may be a spacer between the starter and the motor. There may be a shield between the starter and the transmission housing if your starter is bolted to the transmission.
What is the bell housing?
It is located between the back of the engine and the transmission. It houses the flywheel and clutch if it is a standard or the flex plate and the torque converter if it is an automatic transmission.
Where is Bell housing 1997 Jeep Cherokee sport?
It is the area between the engine and transmission.
Where is the bell housing on a 1994 Jeep Grand Cherokee Laredo?
Mounted between the engine and the transmission. It houses the clutch/pressure plate on a manual transmission or the torque converter on an automatic transmission.
What is the caseing between the motor and the transmission in a 4x4 jeep?
Bell housing. Contains the clutch & flywheel on a manual transmission vehicle. On an automatic it contains the torque converter.
