The crankshaft sensor on a 2 door Honda Accord with a 3L V6 engine is located on the side of the engine, near the oil filter. It screws into the side of the block and outputs the loading of the crankshaft to the vehicle's computer.
The 2006 Honda Accord camshaft position sensor can be found on the back of the right-hand cylinder head. The camshaft position sensor should be labeled as such.
The camshaft position sensor is bolted on the engine near the transmission. It is on the firewall side, and can be reached from the top.
On the 2003, it is located on the back of the engine (by the battery). It is square and appears to be mounted horizontal along the same plane as the camshaft.
It is called a APPS accelerator pedal position sensor. It is located on the front of the engine. It is the part that the throttle cables hook to.
2
If equipped, it is behind the starter.
hey Zim==I think it is in the dist on this engine. GoodluckJoe If your standing in front of the car its on the front of the moter where the trany and moter meet behind the exaust its a pain really tight space, best to go from under the car i have a lift and i still had a tough time.
symptoms of a bad sensor will be , engine cutting out then starting again as you drive. cutting out then being able to restart when vehicle is stopped. hard starting. if left long enuff before replacing, you will not be able to restart
Above the timming cover
P0340 Camshaft Position Sensor Circuit
The camshaft position sensor is located on the end of the camshaft housing, on a 2002 Daewoo. The sensor should be labeled as such.
show location of camshaft position sensor for 2002 Oldsmobile bravada.
The camshaft position sensor is located in the engine compartment of the 2002 Daewoo Leganza. It is at the end of the camshaft housing.
The camshaft position sensor on your 2002 automobile is located on the front of the camshaft. You will need to remove the front engine cover to access the sensor.
Sorry.....there are no 2002 SRT-4's.....03-05 only.....
The camshaft position sensor on a 2002 Mitsubishi Gallant is located behind the rear camshaft bearing. It constantly updates the vehicle' computer about the status of the camshaft.
The 2002 Ford Ranger camshaft position sensor is located on the back of the camshaft. The rear engine plate will need to be removed in order to view the sensor.
The 2003 Saturn L200 does not have a camshaft position sensor.
how do you replace a cam shaft sensor in a 2002 3.3L dodge grand caravan
on top