0
When the ignition key won't turn in a car or truck, it could be that the pins in the lock cylinder came out and locked the lock. Also, if the key is old, it could be worn down too much. One other thing a person should try is rocking the wheel while turning the key. It also could be that the ignition switch needs to be replaced.
What else can I help you with?
Truck blows fuse for ignition when turning key to start?
More than likely because of a short. its probably a shorted ignition switch
Do you need to change the key chip if you change the ignition switch in a terrano?
The ignition switch should be separate from the ignition key/lock assembly, so I'll say no.
Would the ignition switch control the dash lights?
It sends a power to the starter relay/solenoid to engauge the starter. Know that the ignition switch is not what you put the key in and turn. That is the lock assembly. The ignition switch is located lower down on the steering column.
Can a bad ignition switch keep the starter engaged?
Probably not a bad ignition switch, but more likely a bad starter solenoid. It takes a lot of current to get a starter to turn, to much to go through such a small switch like the ignition switch. The ignition switch actually controls a relay(solenoid) which can handle the needed current to get the starter going. On a lot of modern cars the solenoid is built into the starter unlike older cars and trucks where it was mounted on the firewall between the battery and the starter.
How do you unlock 1997 Mercedes Benz C230 ignition switch will not turn.?
Try jiggling the steering wheel while turning the key. Sometimes if the wheels are slights turned when you shut it off the steering wheel is pressed against the ignition switch inside the column. If that doesn't do it you probably will need a new key.
Problem with turning the ignition in your jeep when starting the car how do you fix it?
Physically has a turning problem ? Try your spare key and still has the problem? Replace the ignition switch.
How does the stop switch on a motorcycle work?
By turning the key to the off position, you are simply grounding out the ignition
How do you turn a key on a 1996 vw golf when the switch is locked you have tried turning the wheel at the same time no luck?
there may be a button next to the ignition switch. Try pressing it while turning the key.
How do you unlock the ignition on 2002 Mercedes Benz C240?
Unlock the ignition? Is the key not turning? This car has a steering lock, but if the key is not turning you probably have either a bad key or a bad EIS (electronic ignition switch) make sure you check it with BOTH keys first, if you have another one.
The ignition key stopped turning 1987 Mercedes 190 it will not unlock the steering wheel orturn to start the car?
Your ignition switch crapped on you
How do you unstuck the key switch?
You simply need to turn your steering wheel either way to get the ignition switch to unlock. Turn the key while you are turning the steering wheel and it will unlock it.
The key will not turn over in ignition it is locked?
Sometimes the Steering wheel lock will rest on the locking mechanism and not let you turn the ignition switch. Try turning the wheel one way or the other to relieve the pressure while tuning the ignition switch. If this does not work then you may either have a worn out ignition swtch, Key, or there is a mechanical failure of the switch.
How do you unlock a ignition switch on a 2001 voyager?
Turning the steering wheel left to right rapidly while turning the key in the ignition should free up the ignition switch. If this does not rectify the problem it could be with the lever lockout or the key itself.
What is the name of the ignition component in steering column of 1994 buick regal but not the key ignition switch?
The ignition switch. Where the key goes in is the key tumbler.
Why won't the ignition in a 1988 Oldsmobile Ninety-Eight turn?
Either something is wrong with the key or there is something wrong with the switch. You can try to spray some WD-40 or something like it into the switch and wiggle the key to see if you can get it turning. Otherwise you may have to replace the ignition switch.
When the switch button fails how do you bypass motorcycle ignition wire?
If you have broke your ignition switch or lost the key disconnect the ignition barrel from the white connector plug then pull off the the key hole then with a knife peel back the casing around the wires to bear metal and wrap them together and attach the ignition back and it should be like turning the key.
Can't remove key from ignition switch?
i have a 06 Chevy cobalt and can't get the key out of the ignition switch
