the seat comes off with the plastic rear fenders as one piece. only after the fenders are taken off can the seat actually be removed
How do you remove seat off Kawasaki nomad
To remove a bike seat, locate the bolt underneath the seat and use a wrench to loosen and remove it. Once the bolt is removed, the seat can be taken off by sliding it out of the seat post.
you must remove the bolt behind the rear seat and remove the rear seat then you will see 2 small Allen head bolts remove them and the seat will come right off.
Remove lower seat bottom. Remove two bolts from bottom of seat back. Lift seat back off of its hooks. Remove from car. Use Philips screwdriver to remove 4 screws holding speaker grille to seat back frame.
underneath the back of the seat there are 2 crews undo them then take off the seat
remove the passenger pad first, when removed it uncovers screws on the rear of the drivers seat. Remove these and it comes off.
You have to remove the Allen bolt on the rear of the passenger seat, then remove the two Allen bolts exposed when you removed the passenger seat. The driver seat should slide back and off now.
To remove a toilet seat, locate the bolts securing it to the toilet bowl, typically found underneath the seat. Use a screwdriver or wrench to loosen and remove the bolts, then lift the seat off the bowl.
there are six bolts on the bottom of the rear fender 4 in back and 2 in the front. i found it just as easy to take the whole rear fender off seeing as that only held in by a couple of bolts.
Use your key on the left side by the seat. turn it counterclockwise. and the front seat should pull off. Once you remove the front seat there are two releases to remove the rear seat.
Remove a bolt (hex) from either side at the bottom of the seat. Near the shock.
pop off seat for kawasaski mojave 250cc1989-2005