answersLogoWhite

0

there are six bolts on the bottom of the rear fender 4 in back and 2 in the front. i found it just as easy to take the whole rear fender off seeing as that only held in by a couple of bolts.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you remove the seat on a kawasaki Lakota 300?

To remove the seat on a Kawasaki Lakota 300, locate the two bolts or screws at the back of the seat. Use a socket wrench or screwdriver to remove them. Once the fasteners are removed, gently lift the back of the seat and slide it forward to detach it from the mounting points at the front. Ensure you keep the hardware in a safe place for reinstallation.


How do you remove seat from a kawasaki vulcan nomad 1500?

How do you remove seat off Kawasaki nomad


How do you remove the driver seat cushion from a 1993 kawasaki voyager motorcycle?

1993 kawasaki voyager motorcycle how do you remove the driver seat?


How do you remove the seat on a Kawasaki vulcan 700?

there are two bolts in the back of the seat. remove them and then slide the seat back about an inch and remove


How do you remove seat from 2005 kawasaki z1000?

with your hands.


How do you get to the batterey on a kawasaki teryx?

Remove drivers seat by lifting tab on front of seat.


How do you remove seat from kawasaki Mojave?

pop off seat for kawasaski mojave 250cc1989-2005


How do you remove seat from Kawasaki vulcan?

remove the passenger pad first, when removed it uncovers screws on the rear of the drivers seat. Remove these and it comes off.


Where is the battery on a 2005 kawasaki Z1000 motorbike?

It is underneath the seat, to remove the seat there is a release under the back above the taillight. Remove the seat, and the battery is right there.


How do you remove the seat from a Kawasaki vulcan 800 motorcycyle?

Push down on the seat while you are pulling the lever, then pull up on the seat. Edit: My 96 Kawasaki Vulcan has no leaver. You simply remove the thumb screw at the very back of the seat under the rack, then pull the seat backward till it pops free from the bracket.


Change the battery on a Kawasaki vulcan 900?

remove seat. remove tool case. Remove terminals from battery, lift out.


How do you remove a seat on a kawasaki bayou 250 fourwheeler?

To remove the seat on a Kawasaki Bayou 250 four-wheeler, first locate the securing bolts or clips at the back or sides of the seat. Use a wrench or screwdriver to remove these fasteners. Once they are removed, gently lift the seat upward and back to detach it from the frame. Be sure to store the bolts or clips in a safe place for reinstallation.