Flywheel Torque 61-69 Foot pounds
25-33 ft-lb
200HP 227lb ft torque.
It is best to remove the torque converter to change a gear box on a Nissan. This will help there to be a smoother time adjusting the gear box.
On a 1984 Nissan 300ZX the fuel pump turns on with the key. For a couple of seconds to pressurize the fuel system for initial start-up. Once the engines oil pressure has raised to normal operating pressure. The fuel pump remains on.
The bolts have a number on it, what is the number? There is a general torque spec in the shop manual that will say what the torque is based on that number
Yes, but you will need a starter shim (unless you're also installing an NA clutch and flywheel on a TT motor) and you most likely will have to clearance the bell housing to fit the TT flywheel. Note this is for 1990-2000, not the older generation.
There were 3,000 Nissan 300zx convertibles made
VG30DETT is in the 90-95 Nissan 300zx. It is a v6
Yes it will
yes!
no power to starter on Nissan 300zx twin turbo