0
Code A is primarily "Replace Engine Oil, Oil Filter, and Drain Plug Washer"; also -
. Check all fluid levels and condition
. visually check for leaks
. check tire inflatin and condition
. check operation of all exterior lights
. test battery *** see below
. reset maintenance minder
Code 3 is "Replace the Transmission Fluid"
*** Watch out or your battery will go dead.
At the Honda dealer in W. Lebanon, NH, they just put a machine on the battery to see if it is still good *at that moment*. Unfortunately the battery could die an hour after that because they DO NOT check the battery fluid in non-sealed batteries. This service department even believes that a battery that has caps is "maintenance free" but only a sealed battery is maintenance free, hence NEVER check the battery water/acid level. We learned this after they killed a battery in each of our two Hondas by allowing the fluid to drop way below the plates, but never admitted they were wrong.
What else can I help you with?
What does the code A 134 mean on a 2007 Honda Accord?
The code A134 on a 2007 Honda Accord refers to a specific maintenance reminder indicating that it's time for certain services. The "A" signifies an oil change, while the "1" indicates that the tire rotation is due, and the "3" means that the transmission fluid should be replaced. This code helps ensure that necessary maintenance tasks are completed to keep the vehicle running smoothly. Always refer to the owner's manual for detailed maintenance guidelines.
What does service code B12 mean on a Honda Accord 2009?
It is a maintenance reminder telling you that some regular scheduled maintenance is required. Can be oil change, air filter replacement, tire rotation, etc. Your owners manual should list the code and what is means.
What does it mean when th maintenance require goes on your 2000 Honda Accord?
Where does freon goes in a 2003 Honda accord
What does service code a135 mean on a 2008 Honda accord ex?
Service code A135 on a 2008 Honda Accord EX indicates a maintenance requirement that includes an oil change (A), a tire rotation (1), and a replacement of the engine air filter (3). The code also suggests inspecting the brake fluid (5). It's important to follow the manufacturer's recommended maintenance schedule to ensure optimal vehicle performance and longevity.
What does code PO730D mean on Honda Accord?
02 sensor
What does it mean when the maintenance light button turns on in a 2002 Honda Accord?
Usually it is pre programmed for oil changes and routine maintenance.
What does service code 7 mean on a Honda accord?
There are only 6 service codes for the Honda Accord. Never heard of service code 7.
What do code p1146 mean on a 99 Honda Accord mean?
This is not a legit Honda Code. Have it checked by a Honda dealer to retrieve the correct code.
What does the wrench light mean in 2007 Honda accord?
Oil change
What does it mean when the maintenance light of a 1993 Honda Accord?
It means you need to change the oil/filter.
What do the diagnostic code mean 1990 Honda Accord?
As you do not list the code you are reading, it is impossible to answer your question.
What does b13 mean on a 2009 Honda Accord?
On a 2009 Honda Accord, the b13 maintenance minder code indicates that it's time for routine maintenance. The "b" signifies that the vehicle requires an oil change and other key inspections, while the "13" suggests that the tires need to be rotated and the air filter should be inspected or replaced. It's important to follow these maintenance recommendations to ensure optimal vehicle performance and longevity.
