once you have removed the hub nut you will need a flat metal plate and a nut & bolt. The plate needs to have 3 holes in it, 1 in the centre and the other 2 to line up with the wheel bolt holes. use 2 wheel bolts to secure the plate to the drum, with the nut & bolt through the centre hole. use the nut & bolt to put tension on the hub shaft then tap the bolt to pull the drum off.
To adjust the hand brake on the rear drum of a 1995 Renault Clio, first, ensure the vehicle is securely lifted and supported. Remove the rear wheel and the drum to access the brake assembly. Locate the adjusting wheel or screw mechanism inside the drum; turn it to either tighten or loosen the brake shoes until they make slight contact with the drum. Finally, reassemble the drum and wheel, and test the hand brake to ensure it holds the vehicle securely.
how do remove the brake drum on a 1991 mazda 323
You can remove the front brake drum, on your Kawasaki Mule 2500, by removing the wheel and axle. The brake drum will slide off.
How do you remove rear brake drum from a 1993 Toyota pickup?
how do you remove rear brake drum on a suzuki 2004 xl7
If you're trying to remove the brake drum, be sure to NOT have the emergancy brake on. Remove the wheel and tap the drum with a rubber mallet until it releases, That's it!
To remove a rear brake drum on a Chrysler, first ensure the vehicle is safely elevated and secured on jack stands. Remove the wheel, then locate and remove any retaining screws or clips securing the drum. If the drum is stuck, gently tap it with a hammer or use a brake drum puller to loosen it. Once free, slide the drum off the hub to access the brake components.
Better hope it is not a drum brake- it was originally equipped with a disc brake caliper.
how to remove rear brake drum on 1994 cavalier
To remove the rear brake drum on a 2002 Pontiac Grand Am, first ensure the vehicle is safely lifted and secured on jack stands. Remove the wheel and tire, then locate the drum's retaining screws, if present, and remove them. Use a brake drum puller if necessary to avoid damaging the drum, then gently pull the drum off the wheel hub. If the drum is stuck, you may need to adjust the brake shoes inward by accessing the adjuster through the inspection hole on the backing plate.
Remove wheel Remove brake drum Loosen and remove brake line Remove mounting bolts Pry wheel cylinder off brake shoes Install new cylinder Replace brake lines Replace brake drum Bleed affected brake line
To remove a stuck brake drum you will need to use a brake drum puller to get it off. Many auto parts stores have a loaner tool program where you pay a deposit for the tool and get your deposit back when you return it.