Remove the blown fuse. Replace it with a new fuse.
Just locate the fuse panel under the left side of the dash and find the brake light fuse and pull it out and put the new one in. If there isn't a blown fuse, the brake light switch may be faulty.
Blown bulbs, blown fuse, broken or out of adjustment brake light switch.
Yes, a blown brake light fuse causes the shift interlock to malfunction. If the interlock can't tell if the brake is depressed or not, it won't shift out of park. The brake light fuse is a 15A in the engine bay fuse box.
Short in the wiring, brake light assembly, or possibly a defective brake light switch.
Possibly blown fuse, bad brake light switch, or blown brake light bulbs.
If your brake light is not coming on, you might have blown a fuse. You might also have a bulb that is no longer working.
Check to see if any are blown and replace
If an Acura Vigor brake light is not working there are likely two reasons. One is that a fuse is blown and the other is that the bulb is blown. It could be both.
In a 2000 Mercedes-Benz S500, the brake light fuse is typically located in the fuse box situated in the engine compartment or under the dashboard on the driver's side. The specific fuse for the brake lights is usually labeled in the fuse diagram, which can be found on the cover of the fuse box or in the owner's manual. Check the fuse for continuity and replace it if it's blown to restore functionality to the brake lights.
If there is no brake lights on a 1998 Mazda pickup, check the fuse. If the fuse has blown, the lights will not work.
You have blown a fuse, look for an acc. fuse out.
The brake light fuse on a Chevy Prizm is typically located in the fuse box under the dashboard on the driver's side. You can find the fuse box by looking for a cover panel near the steering column. Inside the fuse box, refer to the diagram on the cover or the owner's manual to identify the specific fuse labeled for the brake lights. If the fuse is blown, replace it with one of the same amperage.