The trouble code P0441 for a 2002 Lexus RX300 indicates an issue with the evaporative emission control system (EVAP), specifically that the system has detected incorrect purge flow. This can be caused by a faulty purge valve, a leak in the EVAP system, or issues with the fuel tank pressure sensor. Addressing this code usually involves inspecting the EVAP components for leaks or malfunctions and replacing any defective parts. It's advisable to perform a thorough diagnostic to identify the root cause of the problem.
how do you remove the glovebox in an rx300 lexus 2002
Lexus manufacturer recommend replace timing belt on Lexus rx300 every 105,000 miles.
The PCV valve on a 2002 Lexus RX300 is located on the passenger side of the car underneath the hood. The valve will be on the rear valve cover.
Lexus has to hook their computer to it to program the key to both lock/unlock and to start the vehicle.
On the open road or freeway with mild inclines.
Check out this diagram, should be all you need! http://img125.imageshack.us/img125/7711/bodywt1.jpg
Trouble code P0046 means: Turbo/Super Charger Boost Control Solenoid Circuit Range/Performance
The brakelight sensor is located on the brake switch, which is on top of the brake pedal and held on with a 14mm jam nut.
next to the oil filter if it has one installed. remove cover plate and install heater not an easy job. tip get it installed by a autoshop
Check the relay, there are 3 drl relay siting rigth above the radiator.
It could be low on coolant. If your vehicle is a 2002-2004 it is probably the magnetic clutch relay as it is a common problem with those years. It is located in the fuse box and a new one runs around $60.
Your motor that drives the laser head is shut. Your motor that drives the laser head BURNED out. I just replaced one in my dad's 2002 Lexus Rx300 You can buy the motor if you are skilled with taking apart multiple layers of electronics and using a solder gun. Or It can be replaced for $250 - for either option you can email: electronictoys@gmail.com It also could be caused by the DVD Drive PC board which in this case the PC board needs to replaced. To have it repaired you could send your unit to www.hitechserv.com