To remove the windshield wiper motor from a 1988 Pontiac Firebird, first disconnect the negative battery cable to ensure safety. Then, remove the wiper arms by taking off the nuts securing them and carefully prying them off the motor spline. Next, access the motor by removing the interior panel under the windshield, and disconnect the electrical connector. Finally, unbolt the wiper motor from its mounting bracket and carefully pull it out.
To remove the windshield wiper motor on a 1988 Firebird, start by disconnecting the negative battery cable to ensure safety. Next, remove the wiper arms by unscrewing the retaining nuts and pulling them off the splines. Then, access the motor by removing the interior panel or cowl cover, followed by disconnecting the electrical connector and unscrewing the motor from its mounting bracket. Finally, carefully pull the motor out of its housing.
To remove the windshield wiper motor on a 2000 Pontiac Bonneville, first disconnect the negative battery cable to ensure safety. Then, remove the wiper arms by taking off the retaining nuts and gently pulling them off the splines. Next, remove the cover panel at the base of the windshield to access the motor, disconnect the electrical connector, and unbolt the motor from its mounting bracket. Finally, lift out the motor and replace it if necessary.
its bolted to the motor
Follow the top radiator hose, to where it intersects with the motor. This would be the thermostat housing. Remove this, and the thermostat will be exposed.
Does your Firebird have a Chevy or Pontiac motor in it?If it is a Pontiac motor, you will need an adapter from Summit or Jeg's.Also, it could be a different output shaft length and spline count.
can you clean a egr valve on a 1995 pontiac firebird with a 3.,4 litre motor
The 1986 Firebird came with either a 2.8L V6 or a 5.0L V8
The 1986 Pontiac Firebird fan relay switch can be found on the back of the fan motor. The relay switch is connected to the fan motor by two retaining screws.
Remove the windshield wiper arm from the windshield wiper motor. Remove the wiring harness. Remove the retaining nut. Reverse the process to install the new windshield wiper motor.
Between 165 and 225 depending on exactly which model. http://www.thirdgen.org/1987-pontiac-firebird
The motor is under the plastic grill that is at the bottom of the windshield. It's held in place by a bunch of plastic "rivits" that you have to remove to get the grill out.
The wiper motor on a 1997 Pontiac Grand Prix is located on the driver's side, beneath the windshield wiper assembly. To access it, you typically need to remove the windshield wiper arms and the plastic cowl cover that sits at the base of the windshield. The motor is mounted to the firewall and connected to the wiper linkage. If you're servicing it, ensure the battery is disconnected for safety.