answersLogoWhite

0

It depends on what yo start with. If you start with concentrated sulfuric acid, it is usually about 18 M or 36 N. So, you would dilute it approximately 1:36 or 1 ml diluted up to 36 mls or any multiple of that. To get the exact dilution, you need to know the exact molarity. If you have some other molarity acid, then the calculations would vary accordingly.

User Avatar

Wiki User

9y ago

What else can I help you with?

Continue Learning about Chemistry

H2So4 is liquidso how much ml of H2So4 take for 1N solution?

To prepare a 1N solution of sulfuric acid (H2SO4), you would need to dissolve 49 grams of H2SO4 in enough water to make 1 liter of solution. Since the density of sulfuric acid is around 1.84 g/ml, you would need approximately 26.6 ml of H2SO4 to make a 1N solution.


How do you prepare 1N hcl to 6N hcl?

To prepare 6N HCl from 1N HCl, you can dilute the 1N HCl by adding 6 times the volume of water to the 1N HCl solution. For example, mix 1 volume of 1N HCl with 6 volumes of water to get a final concentration of 6N HCl. Make sure to add acid to water slowly with stirring to avoid splashes and heat generation.


How do you prepare 100ml of 1N hcl?

To prepare 100 ml of 1N HCl, you would need to dilute 8.4 ml of concentrated hydrochloric acid (37% w/w) with distilled water to a total volume of 100 ml.


How can you prepare 1N H2SO4 from H2SO4 95 percent?

To prepare 1N H2SO4 from 95% H2SO4, you would first need to dilute the 95% H2SO4 with water by adding the appropriate amount of water to achieve the desired concentration. To calculate the volume of 95% H2SO4 needed to make 1N solution, you need to use the formula: (Normality of stock solution) * (Volume of stock solution) = (Normality of diluted solution) * (Volume of diluted solution). Adjust the volumes accordingly to prepare the desired 1N solution.


How do you prepare 0.25N sulphuric acid from 2N sulphuric acid?

To prepare 0.25N sulphuric acid from 2N sulphuric acid, you can dilute the 2N solution by adding 7 parts of water to 1 part of the 2N solution. This will result in a final 0.25N sulphuric acid solution.

Related Questions

H2So4 is liquidso how much ml of H2So4 take for 1N solution?

To prepare a 1N solution of sulfuric acid (H2SO4), you would need to dissolve 49 grams of H2SO4 in enough water to make 1 liter of solution. Since the density of sulfuric acid is around 1.84 g/ml, you would need approximately 26.6 ml of H2SO4 to make a 1N solution.


How do you prepare 1N hcl to 6N hcl?

To prepare 6N HCl from 1N HCl, you can dilute the 1N HCl by adding 6 times the volume of water to the 1N HCl solution. For example, mix 1 volume of 1N HCl with 6 volumes of water to get a final concentration of 6N HCl. Make sure to add acid to water slowly with stirring to avoid splashes and heat generation.


What cannot be used with sulphuric acid to prepare zinc sulphate?

Zinc oxide cannot be used with sulphuric acid to prepare zinc sulphate. This is because zinc oxide is insoluble in sulphuric acid, and therefore, it would not react to form zinc sulphate.


How do you prepare 100ml of 1N hcl?

To prepare 100 ml of 1N HCl, you would need to dilute 8.4 ml of concentrated hydrochloric acid (37% w/w) with distilled water to a total volume of 100 ml.


How can you prepare 1N H2SO4 from H2SO4 95 percent?

To prepare 1N H2SO4 from 95% H2SO4, you would first need to dilute the 95% H2SO4 with water by adding the appropriate amount of water to achieve the desired concentration. To calculate the volume of 95% H2SO4 needed to make 1N solution, you need to use the formula: (Normality of stock solution) * (Volume of stock solution) = (Normality of diluted solution) * (Volume of diluted solution). Adjust the volumes accordingly to prepare the desired 1N solution.


How do you prepare 0.25N sulphuric acid from 2N sulphuric acid?

To prepare 0.25N sulphuric acid from 2N sulphuric acid, you can dilute the 2N solution by adding 7 parts of water to 1 part of the 2N solution. This will result in a final 0.25N sulphuric acid solution.


How do you prepare 1N sulfuric acid?

WARNING: DO NOT DO THIS AT HOME!!Well first you get some sulphuric acid out of a car battery. Just 20ml.Then boil it for about 2 minutes. It depends on how diluted the acid is.And there you go!


How do you prepare 50 mM Sulphuric acid solution?

To prepare a 50 mM Sulphuric acid solution, you would need to calculate the required volume of concentrated Sulphuric acid (typically 96-98%) needed to dilute in water to achieve the desired concentration. You can use the formula: C1V1 = C2V2, where C1 is the concentration of the concentrated acid, V1 is the volume of concentrated acid needed, C2 is the desired concentration (50 mM), and V2 is the final volume of the solution you want to prepare.


How do you prepare 1 N to 0.1N NaOH solution?

To prepare 0.1N NaOH solution from a 1N NaOH solution, you can dilute 1 part of the 1N solution with 9 parts of water (since 1/10 = 0.1). Measure 1 volume of the 1N NaOH solution and add 9 volumes of water to it, then mix well to get your 0.1N NaOH solution.


How do you prepare 1n solution?

Dissolve 1.0 mole gas (17 gram) in 1.0 Liter water


How do you standardize 1N H2SO4 with a KHP?

To standardize 1N H2SO4 with KHP, you would first prepare a solution of KHP of known concentration. Then, titrate the KHP solution with the 1N H2SO4 solution until the endpoint is reached. The volume of H2SO4 used in the titration can then be used to calculate the exact concentration of the H2SO4 solution.


What type of bond hydrochloric accid?

covalent bond