0
What else can I help you with?
How many networks and addresses are available for class b ip addresses?
First octet rule for each class:Class A: 0xxxxxxxClass B: 10xxxxxxClass C: 110xxxxxClass A range is 0 - 1270.0.0.0 and 127.0.0.0 are not "routable" IP addresses. One defines all networks and the other is the loopback. We have a total of 126 usable networks and 16,777,214 usable hostaddresses per network. There are even less if we don't count the private address of 10.0.0.0 (RFC 1918).Class B range is 128 - 191There are 16,384 total networks in this class; that's including the private addresses of 172.16.0.0 - 172.31.0.0 (RFC 1918). There are a total of 65,534 usable host addresses per network.Class C range is 192 - 223There are 2,097,152 total networks in this class; that's including the private addresses of 192.168.0.0 - 192.168.255.0 (RFC 1918). There are 254 usable hosts addresses per network.
How many addresses are in an address book?
many addresses
How many networks in 10.0.0.0?
You can keep it as a single network, or divide it into separate subnet (sub-networks), depending on your needs.You can keep it as a single network, or divide it into separate subnet (sub-networks), depending on your needs.You can keep it as a single network, or divide it into separate subnet (sub-networks), depending on your needs.You can keep it as a single network, or divide it into separate subnet (sub-networks), depending on your needs.
How many network and host bits are available for class C IP address?
By default Class C subnet mask is 255.255.255.0 = 24 bits for network id and 8 bits for host id. in Binary 1111 1111. 1111 1111. 1111 1111. 0000 0000 Here all 1s are Network bits and all 0s are host bits. For this subnet mask you can have 256 hosts. And you can use 254 host and asign IP address to them. By Saurabh
IP ADDRESS occupies how many bytes?
IPv4 addresses are 4 bytes. IPv6 IP addresses are 16 bytes.
How many host addresses may assign when using the 128.107.0.0?
To determine the number of host addresses available in the 128.107.0.0 network, we first need to identify its subnet mask. Assuming it's a Class B network with a default subnet mask of 255.255.0.0 (or /16), the number of usable host addresses can be calculated using the formula (2^{(32 - subnet_bits)} - 2). This results in (2^{(32 - 16)} - 2 = 65,534) usable host addresses, where we subtract 2 for the network and broadcast addresses.
How many subnets and hosts per subnts can you get from 172.30.0.0?
The IP address 172.30.0.0 is a private IP address in the Class B range, which has a default subnet mask of 255.255.0.0 (or /16). If you use the default mask, you can create 65,536 addresses (2^16), allowing for 65,534 usable hosts per subnet (subtracting 2 for the network and broadcast addresses). If you further subnet this address, the number of subnets and hosts per subnet will depend on the subnet mask you choose. For example, using a /24 subnet mask would give you 256 subnets with 254 usable hosts in each.
How many bits are in 172.168.2.0 26 subnet?
The subnet mask for a /26 subnet indicates that the first 26 bits are used for the network portion, leaving 6 bits for the host portion. In this case, the subnet 172.168.2.0/26 can accommodate 2^6 = 64 addresses, but only 62 are usable for hosts (subtracting the network and broadcast addresses). Thus, there are 26 bits designated for the network and 6 bits for hosts within this subnet.
How many individual systems can be subnet with netmask 255.255.240.0?
A netmask of 255.255.240.0 corresponds to a /20 subnet, which provides 12 bits for host addresses (32 total bits minus 20 bits for the network). This allows for (2^{12} - 2 = 4096 - 2 = 4094) usable individual systems, accounting for the network and broadcast addresses that cannot be assigned to hosts.
How many IP's in a 28 network?
In a /28 subnet, there are 16 IP addresses available. This is calculated as 2^(32-28) = 2^4 = 16. However, two of these addresses are reserved: one for the network address and one for the broadcast address. Therefore, there are 14 usable IP addresses in a /28 network.
How many ip addresses in one class B subnet?
2 567
How many networks wil be created using 255.255.0.0 given a class A ip network?
Using a Class A IP network with a subnet mask of 255.255.0.0 (also known as /16), you can create 2^16 (or 65,536) subnets. This is because the first 16 bits are used for the network portion, leaving 16 bits for host addresses within each subnet. However, the number of usable networks may be slightly lower depending on reserved addresses.
How many ip addresses on a subnet?
Use the formula 2n - 2 to find the number of clients available in a subnet. The 'n' refers to the number of bits available for client addresses, and thus will vary depending on the starting network type (class A, B, or C). If you are using the 0th subnet (as in Cisco routers) then the formula is 2n
How many usable host are available given a Class C IP address with the default subnet mask?
with the default subnet mask, the number of clients in a class A network is: 16,777,214
Given class C address with a default subnet mask How many possible subnets and usable hosts if 4 bits were borrowed?
that gives you 16 subnets with 14 usable IPs for hosts that is because one is for subnet and one for broadcas in that subnet for example: 192.168.1.0/28 - subnet number 192.168.1.15 -broadcast number usable IPs for hosts - IPs between them that is 14
How many usable IP addresses are there in a 23-bit (255.255.254.0) subunit?
7
How many number of bits are in the subnet 100?
A subnet with a prefix of /100 indicates that the first 100 bits of the IP address are fixed for the network portion. However, since IPv4 addresses are only 32 bits long, a subnet mask of /100 is not valid in this context. In IPv6, which allows for longer prefixes, a /100 subnet would have 100 bits dedicated to the network, leaving 28 bits for host addresses.
