How many ip addresses on a subnet?

How many usable IP addresses are in a 20-bit subnet?

There are 4094 usable IP addresses in a 20-bit subnet.

How many ip addresses in one class B subnet?

2 567

An organization has decided to use IP addresses in the range 172.20.128.0 to 172.20.143.255 Which combination of network ID and subnet mask identifies all IP addresses in this range?

An organization has decided to use IP addresses in the range 172.20.128.0 to 172.20.143.255. Which combination of network ID and subnet mask identifies all IP addresses in this range?

Do computer 1 and 2 belong in the same subnet?

To determine if Computer 1 and Computer 2 belong to the same subnet, you need to compare their IP addresses and subnet masks. If the network portion of their IP addresses, as defined by the subnet mask, matches, then they are in the same subnet. For instance, if Computer 1 has an IP address of 192.168.1.10 with a subnet mask of 255.255.255.0, and Computer 2 has an IP address of 192.168.1.20 with the same subnet mask, they are in the same subnet. If the network portions differ, they belong to different subnets.

Why can't a network 192.168.1.136 with subnet for six client addresses connect?

IP Address Additional info: The IP address for a client may not be on the correct subnet; it is possible that the subnet mask is incorrect.

IP subnet masks allows for up to 30 hosts per subnet?

255.255.255.224 will select a network of 32 IP addresses, with the lowest reserved as the network identifier, and the highest as the broadcast address, leaving 30 usable host IP addresses.

What is the range of usable IP addresses for the following IP subnet 12.119.215.66?

To determine the range of usable IP addresses for the subnet containing 12.119.215.66, we first need to know its subnet mask. If we assume a common subnet mask of /24 (255.255.255.0), the subnet would be 12.119.215.0, with usable addresses ranging from 12.119.215.1 to 12.119.215.254. The first address (12.119.215.0) is the network address, and the last (12.119.215.255) is the broadcast address, which cannot be assigned to hosts. If the subnet mask differs, the range would change accordingly.

Subnet mask for 172.20.128.0?

This IP address can work with a variety of different subnet masks.This IP address can work with a variety of different subnet masks.This IP address can work with a variety of different subnet masks.This IP address can work with a variety of different subnet masks.

How many addresses in class c?

A Class C address has a subnet mask of 255.255.255.0, which allows for 256 total IP addresses (from 0 to 255) in each subnet. However, two addresses are reserved: one for the network address and one for the broadcast address. This means there are 254 usable addresses in a Class C subnet.

What is the IP of the router that connects to this router?

It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.

Do you share your IP address with other internet users in your house who use the same wireless internet 'network' as you?

Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.

Where do you get your subnet number from?

You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).