A graduated cylinder has a constant diameter and a printed scale on its side that indicates volume inside the graduated cylinder for any given liquid level. A flask has none of these advantages.
A graduated cylinder would be more accurate for measuring the volume of a liquid compared to a beaker. This is because graduated cylinders have more precise volume markings and allow for more accurate readings due to their narrow and uniform shape.
A 10ml graduated cylinder is more accurate than a 100ml graduated cylinder because the smaller volume allows for more precise measurements. The smaller increments on the scale of a 10ml cylinder result in smaller margin of error compared to a 100ml cylinder. This enhances the accuracy of measuring small volumes with greater precision.
A conical flask is typically used for holding and mixing liquids in a laboratory setting. Its accuracy in measuring volumes is limited, as it lacks precise calibration markings like those found on a graduated cylinder or volumetric flask. For more accurate volume measurements, a more precise measuring device should be used.
It uses smaller segments of measurement making it more accurate
The graduated cylinder is used to measure liquid volume. These cylinders are said to be more precise and accurate over beakers and flasks.
A graduated cylinder with markings at every 1mL would provide the most precision when measuring 235mL of fluid. This allows for more accurate readings compared to a beaker or flask with wider intervals between markings.
A graduated cylinder would be more appropriate for measuring isopropyl alcohol as it provides more accurate measurements due to its narrower and longer shape. Beakers are better suited for mixing or holding liquids rather than precise measurements.
A grade A burette (more accurate) or a graduated cylinder.
They both do something :)
Put it in a graduated cylinder. a) Find a graduated cylinder big enough to hold a can of Coke. b) Make sure it has a small scale. (Smaller scales are more accurate.) c) Fill the graduated cylinder with water to a mark on the cylinder. d) Find how much higher the water is when you drop the can in.
A Volumetric Pipette is the most accurate and used for titration calculations, if you include that as a type of pipette then it is FAR more accurate than a graduated cylinder. A beaker is very inaccurate so don't even go there.
Technically, for a liquid, one could use Erlenmeyer flasks or beakers to measure volume; however, it will not be as accurate as a graduated cylinder. A buret can also be used to measure the volume of a liquid if more accurate results are needed.