It uses smaller segments of measurement making it more accurate
Depending on how accurate you want to be you can use a variety of methods. Common methods include the following (with increasing level of accuracy) 1) graduated cylinder 2) volumetric pipette. 3) Calibrated micro-pipette (may require more than one transfer)
There's not too much of a difference between a graduated cylinder and a measuring cup, other than 'graduated cylinder' is more science talk.
If you measure properly, the amount of water does not change. Measurement with whatever graduated cylinder you choose will not alter the amount of liquid measured. Most people choose to measure once with a larger one, but if the amount of liquid falls between the measurement lines, you can measure the "leftover" with a smaller cylinder and find the exact answer.
A graduated cylinder is a piece of laboratory glassware used to accurately measure out volumes of chemicals for use in reactions. They are generally more accurate and precise for this purpose than beakers or erlenmeyer flasks, although not as precise as a volumetric flask or volumetric pipet. They come in a variety of sizes for different volumes, typically 10 mL, 25 mL, 50 mL, or 100 mL and up to as large as 1 or 2 liters.Determine the volume contained in a graduated cylinder by reading the bottom of the meniscus at eye level.In other words, holding the graduated cylinder at eye level, the bottom of the curved surface of the liquid (called the meniscus) is where you read off the mark on the graduated cylinder to determine the volume properly.
Graduated Cylinder - Marbles
A 10ml graduated cylinder is more accurate than a 100ml graduated cylinder because the smaller volume allows for more precise measurements. The smaller increments on the scale of a 10ml cylinder result in smaller margin of error compared to a 100ml cylinder. This enhances the accuracy of measuring small volumes with greater precision.
A graduated cylinder has a constant diameter and a printed scale on its side that indicates volume inside the graduated cylinder for any given liquid level. A flask has none of these advantages.
A graduated cylinder would be more accurate for measuring the volume of a liquid compared to a beaker. This is because graduated cylinders have more precise volume markings and allow for more accurate readings due to their narrow and uniform shape.
the most accurate would be a graduated cylinder but there are beakers and other things that aren't as accurate
The graduated cylinder is used to measure liquid volume. These cylinders are said to be more precise and accurate over beakers and flasks.
to make an accurate liquid volume
a graduated cylinder
A graduated cylinder would be more appropriate for measuring isopropyl alcohol as it provides more accurate measurements due to its narrower and longer shape. Beakers are better suited for mixing or holding liquids rather than precise measurements.
A grade A burette (more accurate) or a graduated cylinder.
Put it in a graduated cylinder. a) Find a graduated cylinder big enough to hold a can of Coke. b) Make sure it has a small scale. (Smaller scales are more accurate.) c) Fill the graduated cylinder with water to a mark on the cylinder. d) Find how much higher the water is when you drop the can in.
A Volumetric Pipette is the most accurate and used for titration calculations, if you include that as a type of pipette then it is FAR more accurate than a graduated cylinder. A beaker is very inaccurate so don't even go there.
Technically, for a liquid, one could use Erlenmeyer flasks or beakers to measure volume; however, it will not be as accurate as a graduated cylinder. A buret can also be used to measure the volume of a liquid if more accurate results are needed.