0
To connect a wire to an electric bulb you will need a battery, wires with alligator pegs and the bulb, plus plasticine or blue tack. You must stick the plasticine to the end of the battery and then also you must stick the other side of the battery with plasticine (the wires must be under the plasticine). next use the alligator pegs to hold both sides of the bulb. thus your bulb works. You should find this information pretty helpful.
Answer
You wire a lamp holder, and insert the lamp (not 'bulb' -you plant bulbs!) into the lamp holder.
What else can I help you with?
Using 1 cell 1 bulb and 1 switch draw a circuit to show bulb working only when switch is not closed?
This answer website does not have the ability to draw diagrams. From the positive side of the battery connect it to one side of the switch. From the other side of the switch connect it to the centre terminal of the first bulb's socket and then continue the wire to the centre terminal of the second bulb's socket. From the negative side of the battery, connect a wire to the shell terminal of the first bulb's socket and then continue the wire to the shell terminal of the second bulb's socket. When you turn the switch on the both lamps will glow.
What is the thin wire is an electric bulb that glows called?
The thin wire in an electric bulb that glows is called a filament. It is typically made of tungsten and glows when electricity passes through it, producing light.
What material will allow electricity to flow between the battery and the light bulb?
A metal wire is typically used to allow electricity to flow between the battery and the light bulb. Metals are good conductors of electricity due to their free-flowing electrons that can carry electric charges. The wire completes the circuit, allowing the electric current to travel from the battery to the light bulb, providing power for it to illuminate.
What powers a light bulb?
The energy used by a lightbulb in kWh can be calculated from the voltage across the bulb, the current through the bulb, and the number of hours of operation of the bulb. energy = voltage * current * hours / 1000
If you wired up the circuit with a bulb two batteries and a switch with a thin wire what will happen?
The circuit will likely overload the thin wire due to the higher current flowing from the batteries to the bulb. This can cause the wire to heat up and potentially melt or even start a fire. It's important to use wires that can handle the current in a circuit to prevent overheating and potential safety hazards.
How do you use a light bulb as a resistor when charging a capacitor?
connect the light bulb to the positive wire like a inline fuse and then connect the wire to the battery it should just burn out the bulb
How do you make a circuit with a light bulb and battery?
Get your bulb, it should be a very small wattage (weak) one, get your battery and wires, connect one wire to plus side of abttery and other wire to minus side of battery, then connect to the bulb, you may have to play around a bit to find a connection that produces light.
How do you connect a wire to make the bulb light?
To connect a wire to make a bulb light up, you need to complete an electric circuit. This involves connecting one end of the wire to the positive terminal of a power source (such as a battery) and the other end to the bulb's positive terminal. Then, connect the negative terminal of the battery to the negative terminal of the bulb to complete the circuit and allow electricity to flow, causing the bulb to light up.
What do you need to have a simple circuit?
Take a battery, a wire and a little light bulb. Put the wire on the flat part of the battery then put the other end of the wire on the side part of the bottom of the light bulb. Put the end of the light bulb on the top of the battery, dont touch the wire to the top when the light bulb is on it because is either shocks you or doesnt work.
How does a wire connect to a bulb?
A wire connects to a bulb by attaching one end of the wire to the metal base of the bulb and the other end to the metal contact on the bulb socket. When the circuit is complete, electricity flows through the wire and powers the bulb, causing it to light up.
Will the light bulb light up if you connect a wire to it?
No, a light bulb needs a closed circuit with a power source, such as a battery or electrical outlet, in order to light up. Simply connecting a wire to a light bulb without a power source will not allow it to light up.
How can I create a simple light bulb circuit using basic components?
To create a simple light bulb circuit, you will need a power source (such as a battery), a light bulb, and wires to connect them. Connect one end of the wire to the positive terminal of the battery, and the other end to one terminal of the light bulb. Then, connect another wire from the other terminal of the light bulb to the negative terminal of the battery. When the circuit is complete, the light bulb should light up. Make sure to use the correct voltage for the light bulb to avoid damaging it.
How do you connect the parts of a simple electric circuit together so that the light bulb lights up?
Simply connect the -ve of the bulb to -ve of the battery and +ve of bulb to +ve of battery using an electrically conductive wire, the bulb will light automatically.
How can I create a simple light circuit using basic components?
To create a simple light circuit, you will need a power source (such as a battery), a light bulb, and wires. Connect one end of the wire to the positive terminal of the battery, then connect the other end of the wire to one terminal of the light bulb. Next, connect another wire from the other terminal of the light bulb to the negative terminal of the battery. When the circuit is complete, the light bulb should light up. Make sure to handle the components carefully and follow safety precautions when working with electricity.
Will two batteries and a wire make a light bulb light?
first of all, you need a bulb, a wire, and ONE light bulb. You clip the wire on the battery and touch the wire on the bottom of the light bulb
How do you wire a light bulb holder properly?
To wire a light bulb holder properly, first turn off the power source. Connect the black wire to the brass screw terminal and the white wire to the silver screw terminal. Make sure the wires are securely fastened and the connections are tight. Finally, screw in the light bulb and turn the power back on to test the light.
How do you make to make the perfect curcuit?
The things you need for your curcuit are: A light bulb, Bell wire, A Battery and a conducter ex. pin, paper clip Attach the bulb together with the battery using the bell wire. With the two ends of the wire connect to the conducter and see if light bulb comes on.
