0
How much current will an electric heater draw from a 110-volt line if the resistance of the heater when hot is 26.7 ohm?
Wiki User
∙ 10y ago
4.12A. V=IR
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What is stepped resistor?
The resistance that controls a heater motor in the electric system .
If a 325 watt heater has a current of 6.0A what is the resistance?
Watts = Current x Volts with your resistive heat application. To figure out resistance you need to know voltage and current. Since you are drawing 6 amps then Volts = 325/6. This means that there is about 54 volts supplying the heater which seems like a very strange supply voltage. Since Volts = Current x Resistance the resistance = 325/36.
What current is taken by a heater with a resistance of 24 ohms when connected to 120 volt supply?
I don’t know
If the current through a heater coil is 5 amp and the supply voltage is 120 volts the coil resistance is?
The formula you are looking for is R = E/I. Resistance = Volts/Amps.
Explain why an electric bulb becomes dim when an electric heater in parallel circuit is made onWhy dimness decreases after some time?
this happen due to sudden amount of voltage drop in the main feeder due to large current drawn by the heater , so this drop in voltage will let the bulb operate by avltage of a mount (V-Vd) [where V represent the supply voltage and Vd represent the voltage drop in the main feeder of the circuit] , which is less than the voltage before the heater is connected and due to this situation the current passes through the wire of the bulb will be less and therefore the brightness of the bulb becomes dim.after a while the wire of the heater will has high temperature which increase its resistance and due to this the current drawn by the heater will decrease than the current at the first time , therefore the drop in voltage will also decrease , which implise increase in current drawn by the bulb and therefore the dimness decrease .
Why does the cord of an electric heater not glow while the heating element does?
The heating element of an electric heater is a "resistor", the cord which conducts the electricity is not. The resistance of the element of an electric heater is very high. As current flows through the heating element, it becomes red hot and glows. On the other hand, the resistance of the cord is low. It does not become red hot when current flows through it.
What is the voltage of a small electric heater if the heater is drawing 12 amperes and has a resistance of 10 ohms?
Voltage is current times resistance, 1.2 x 110 = 132 volts.
Does an electric motor have different resistance than an electric heater?
Yes it would be unlikely an electric motor coincidentally exactly matched the resistance of an electric heater.
Why are wires supplying electric current to the water heater thicker than those supplying current to the lights?
the water heater operates at high power compared to the lights and so the water heater requires a larger current. The wires supplying current to the water heater are thicker so that the wires have a low resistance. This reduces the risk of the wires overheating.
Electric Hot Water Heater?
form_title= Electric Hot Water Heater form_header= Install an electric hot water heater. Is your current water heater electric?*= () Yes () No How old is your home?*= _ [50] What is your current monthly electric bill?*= _ [50]
Does increasing the voltage to an electric heater increase the amperage it draws?
It will increase the current since the water heater is made of a heating element and which is resistive in nature. Ohms law states that V=IR where V is the voltage, I the current and R the resistance. Now the resistance will always remain constant. Thus, when the voltage is increased, the current will also increase.
When a single phase supply connect to a electric heater short circuit not there why?
The electric heater is basically a resistor, designed to have the right resistance to draw the required current. So a 2 kW heater designed for a 230 v supply is really a resistor of 28.8 ohms, so when it's connected the current is 8 amps and the power is 2 kW.
What is stepped resistor?
The resistance that controls a heater motor in the electric system .
Examples of heating effect of electric current?
-kettle -electric heater that's all i have! :)) When a current passes through a wire, the wire heats up. This is caused by the conversion of electrical energy into heat energy. /the heat produced depends on the resistance of the wire.
Why is it important that the resistance of an extension cord used to power an electric heater be kept low?
An electric heater is one of the high-power appliances in a house, commonly taking 1.5 to 3 kilowatts of power. The current is high, and therefore there is a drop in the voltage applied to the heater equal to the current multiplied by the resistance of the cord. There is probably little power wasted, because any heat from the cord goes to heat up the same room. But a voltage drop causes the heater to draw less current because its resistance is constant, and therefore less total power is provided to heat the room. If the heater is thermostatically controlled so that it is not working all the time, the difference is small because any reduction in the heater's power would cause the thermostat to keep it going for longer, to compensate.
What is the voltage across an electric water heater element that has a resistance of 32 ohms when the current through it is 6.8A?
It is 6 times 8 and the answer is in volts.
Does the resistance of heater coil remains same when current flows through it?
Typically resistance rises with temperature.
