If the resistance is increased the current, which is inversely proportional, decreases and, the voltage drop increases.
The value for resistivity will remain unchanged (provided temperature remains constant). Resistivity is a property of the material. The resistance, however, will double. Remember that resistance is directly proportianal to the length of the conductor and inversely proportional to the cross-sectional area of the conductor.
V = IR Where, V = voltage I = current R = resistance Thus if resistance is increased with constant voltage current will decrease
On a multimeter, a high resistance would indicate a high Ohmic value and a low resistance would indicate a low Ohmic value. Specific values would be relative to device you are measuring.
The value of resistance when there is a short circuit varies depending on the nature of the fault, but it could be fractionally above zero or higher.
The current decreases due to I=V/R. The ammeter reading will decrease as R is increased.
if we remove a resistor from the parallel connection the effective resistance value will be increased.
U didn't clearify resistance in what aspect. If u mean electrical resistance,Resistance is phenomenum which describes the limitation of the flow of electric current in an electrical circuit. According to Ohms law (V=IR),the value of resistance is directly proportional to the value of voltage and inversely proportional to the value of current.That is,as the value of resustance increased,voltage also increases;also if the valur of resistance increases,the current reduces(as in I=V/R)
If Rotor resistance is increased torque is increased
If resistance is increased, current decreases. Ohm's Law: current equals voltage divided by resistance.
If resistance is increased, current decreases. Ohm's Law: current equals voltage divided by resistance.
when the lengh of the conductor is increased by 25%. find the increase in its resistance
The number of ohms is, precisely, the value of the resistance.
The value for resistivity will remain unchanged (provided temperature remains constant). Resistivity is a property of the material. The resistance, however, will double. Remember that resistance is directly proportianal to the length of the conductor and inversely proportional to the cross-sectional area of the conductor.
what is the diference betwean calculated and maesured value
it increases
V = IR Where, V = voltage I = current R = resistance Thus if resistance is increased with constant voltage current will decrease
what is the resistance value of a healthy earth pit