Measures resistance.
Infinity.
an ohm meter concerning electrical impedance
If the circuit is carrying current then that means that the load (resistance) is in the circuit. if an ohm meter is connected in the live circuit then there would be some voltage drop at the ohm meter but as the meter has very less resistance, this would damage the instrument.
I think you mean megohm-meter or "megger" which is a high voltage, low current electrical insulation tester.
The VOM is in the classification of a multimeter. This means that the one meter can do several functions. VOM stands for Volt Ohm meter. In the voltage portion, the meter has the ability to measure a variety of voltages from fractional usually up to 1000 volts. This is both AC and DC voltages. In the ohms portion, the meter has the ability to find the resistance of components. On most good multi meter there is a continuity setting that will have a sound emitted if what you are testing has continuity through it. That setting is very useful in troubleshooting control panels to locate open and closed contacts in energized and de energised relays.
as a tester
1 Ohm meter X (Mega Ohm/ 1000 Ohms) X (100 cm/meter) = 100/1000 Mega Ohm cm = 0.1 Mega Ohm cm method: dimensional analysis
Capacitance is measured in Farads. "The unit... in ohm and meter" does not make sense.
if it is ohm meter and not ohm per metre; divide by 1,000,000 to convert ohm to megaohm, then divide by 1000 further to convert metre into kilometre
Ohm meter
You can check glow plugs with an ohm meter. should be <1ohm
To ohm out a motor one would use an ohm meter. If one does not own or can not obtain a meter, the motor can be taken to a shop and ohmed out there for a fee.
ohm meter
With an Ohm meter.
By ohm meter.
Measures resistance.
An ohm meter doesn't put out enough voltage, you need to use a megger.