0
What else can I help you with?
What is an MA fuse?
It is a fuse that is rated in one thousandths of an amp. An example, a 500 mA fuse can also be called a 1/2 amp fuse.
What size wire cable and fuse for a 9.8KW shower?
7.2kW shower = 32 Amp fuse = 6 mm2 cable size7.5kW shower = 40 Amp fuse = 10 mm2 cable size8.5kW shower = 40 Amp fuse = 10 mm2 cable size9.5kW shower = 40/45 Amp fuse = 10 mm2 cable size10.5kW shower = 45 Amp fuse = 16mm2 cable size
What size hot wire do you need for a 1900 watt amp?
A 12 gauge wire can support a load of approximately 2200 watts.
How many 50 watt lights on a 15 amp circuit?
50 watt equals less than 1/2 amp current flow at 120 volts so you can have 30 light on a 15amp breaker or 40 on a twenty amp breaker.
Can you run a 3200 watt oven on a 20 amp breaker?
a 220 volt, 3200 watt oven will draw under 15 amps, so yes a 2o amp breaker will work.
Will a 5000 watt amp wiring kit work well on a 1600 watt amp?
Yes I do not see why not as long as the in line fuse does not exceed the power the amp is pulling. You want the fuse to blow instead of the amp so you need a fuse that can only handle 1600 watts or the equivalent to....
What size fuse for a 200 watt amp?
To determine the fuse size for a 200 watt amp, you will need to divide the power rating by the voltage of the system. If the amp operates on a 12V system, the amperage would be around 16.67A, so a 20A fuse would be appropriate for a 200 watt amp.
Is 700 amp for 500 amp OK?
No, a 700 amp fuse would not be suitable for a 500 amp circuit. The fuse amperage rating should be equal to or slightly higher than the circuit's maximum amperage to provide proper protection. In this case, a 500 amp fuse or slightly higher would be the appropriate choice.
What is an MA fuse?
It is a fuse that is rated in one thousandths of an amp. An example, a 500 mA fuse can also be called a 1/2 amp fuse.
What speaker match to 500 watts amp?
All car speakers will go well with a 500 Watt amp, but for the best effect, get a power subwoofer.
Where is polaris predator 500 fuse?
there isn't a fuse, before the starter solenoid there is a circuit breaker 20 amp, let me know if you need a diagram i need a diagram
What size of amp would you need for 2 dual 12 inch subs they're are 4 ohms 175 watt rms 500 watt max?
since u have two I would say 400 or 500 rms apm
Will a 120 volt circuit carrying a 2200 watt load blow a 15 amp fuse?
It will draw over 18 amps and will blow a 15 amp fuse.
2007 Chevy Impala cigarette lighter fuse?
fuse is under the hood by passenger side in fuse box labled as amp is a 25 watt fuse...there is another by passenger door in the vehicle also labled amp
Can a 800 watt amplifier push two 1052 watt subwoofers?
Yes the amp can push the 2 subs. I have 2 1250 watt 12inch subs and 1 maybe 400 or 500 watt amp and the amp does fine but if you want more bass at lower levels of volume then you want to have a bigger amp. Just make sure your amp doesnt blow your subs.
What speakers should you use with 500 watt amp?
You need to see specifications of both amp and speaker, though you didn't provided much info you can use around 300W to 400W speakers whichever is available.
What amperage breaker to run 500 watt 240 volt heater?
To run a 500 watt 240 volt heater, you would need a 2.08 amp breaker. This can be calculated by dividing the wattage by the voltage (500W / 240V = 2.08A). You would typically round up to the nearest standard breaker size, which in this case would be a 3 amp breaker.
