0
What else can I help you with?
Can you convert 415v 3 phase to 230v single phase?
415V 3 phase is the line to line voltage. The line to neutral of this supply is 230V single phase. Therefore you use one of the phases and the neutral.
How do you reduce rpm of an electric motor from 1200 rpm to 240 rpm?
You would use a worm drive meshed with a gear that has 130 teeth.
What is the resistance of the windings on a 2.2kw 240v motor?
To calculate the resistance of the windings on a 2.2 kW, 240 V motor, you first need to determine the current it draws. Using the formula ( P = V \times I ), the current ( I ) can be calculated as ( I = P / V = 2200 \text{ W} / 240 \text{ V} \approx 9.17 \text{ A} ). Assuming the motor operates at full efficiency, you can use Ohm's law ( R = V / I ) to find the resistance: ( R = 240 \text{ V} / 9.17 \text{ A} \approx 26.2 , \Omega ). Thus, the resistance of the windings is approximately 26.2 ohms.
How can you connect a 120 volt motor to run with 240 volt?
Answer for USA, Canada and countries running a 60 Hz supply service.Use one leg of the 240v and the neutral wire. Most electric dryers run the motor this way. The heating element is 240v but the motor is 120v.NO, THAT IS DANGEROUS ADVICE because a 240 volt service has a circuit breaker which is sized for the current draw of a large 240 volt appliance, so it would have a rated amperage that is too high to protect a 120 volt motor running on its own.Only 240 volt appliances such as dryers, air conditioners, etc. are safe to use on 240 volt circuits.As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
Can you put 480 volts on motor wired for 230 volts?
It depends on the device, if for instances the machine is a pc, laptop mobile phone charger or anything that has a modern switch mode power supply built into it then you can use it on anything between 110 and 240, it will auto select, i don't recommend attaching a machine that is rated at 240v to a 460v supply, you will need to contact the manufacture to determine operating parameter's.
How much current per phase will a 18KW motor draw on 415 v?
To calculate the current per phase, use the formula: Current (I) = Power (P) / (Square Root(3) x Voltage (V)). For an 18kW motor at 415V, the current per phase will be: 18,000W / (1.732 x 415V) ≈ 24.5A per phase.
Will a 240 volt string of Christmas lights work on a 110 volt socket?
No, a 240 volt string of Christmas lights is designed to be used with a 240 volt socket. Plugging it into a 110 volt socket may damage the lights and pose a safety hazard. Be sure to always use lights with the correct voltage rating.
How do you install a switch for a 240 volt motor?
Use a DPST - A two pole switch.
How do you replace fan belts in a Volvo 240?
Break loose the Lock nut, with a 1/2" wrench or socket, and use a 10mm socket to loosen the longer tension bolt, and the belt will fall off
How do you replace fan belts in a Volvo 240 DL?
Break loose the Lock nut, with a 1/2" wrench or socket, and use a 10mm socket to loosen the longer tension bolt, and the belt will fall off
How many amps does a78kw 415volts 50 hz motor take?
To calculate the amperage, use the formula: Current (A) = Power (W) / (Voltage (V) * √3 * Power factor) Assuming a power factor of 0.8 for a typical motor, the current draw for a 78kW 415V motor at 50Hz would be approximately 111.58A.
How many amps is a 3 hp 240 volt motor use?
AWG #10 copper on a 30 amp breaker.
What size ratchet do you use to change motor oil in a2000dodge grandcaravan?
Use a 3/8 ratchet and the correct size socket on the drain plug.
Can you convert 415v 3 phase to 230v single phase?
415V 3 phase is the line to line voltage. The line to neutral of this supply is 230V single phase. Therefore you use one of the phases and the neutral.
What is the standard voltage used in homes and businesses in New York City?
Standard household and business power in the entire US is 120V single phase and 240V double phase. Light industry will likely use 208V three phase, 240V three phase, 400V three phase, 415V three phase, or 480V three phase. Heavy industry and subway systems use higher AC voltages and sometimes DC.
Can you use a 120 Watts energy savings bulb on a 240 ceiling socket?
You can use a lower wattage bulb on a higher wattage fixture provided the voltage rating is the same and the bulb base is the same.
How can you close your PT Cruiser sunroof manually?
To close the sunroof on a PT Cruiser, you have to use an allen wrench or socket to turn the motor manually. The motor might be located at the front of your sunroof.
