I assume that by two-phase, you really are talking about a supply with two hot wires and a neutral, such as 120/240 volt. This is single phase power, it just has power taps on both ends of the transformer winding, the neutral is the center tap.
I don't think it is possible to convert or rewire your motor. A large 3 phase motor must be run on a 3 phase electrical supply. It will not run and will overheat if you try to connect it to a single phase supply. The only way to make a 3 phase supply from a single phase supply is to use a converter like a motor-generator set. That would be way more expensive than getting a new motor.
You probably need a 5hp or 7hp motor. Look for HP rating o the 3 phase motor and select the same for single phase. 3 phase has same power but is more efficient at electricity use. Also consider a 3 phase converter. It allows a 3 phase motor to run on single phase service.
Probably not. The single phase three horse power motor will be much larger in physical size than its three phase counterpart, and will probably not fit.
A synchronous motor can be a type of 3-Phase AC motor, or not.A synchronous motor is defined by the period of the rotor being synchronized with the frequency of the stator windings' current. The stator windings might be 3-Phase or not (2-Phase would work).Also synchronous motors are not the only type of 3-Phase AC motors. An induction motor could also be 3-Phase AC and has a few advantages and disadvantages over a synchronous motor.
by using dc volts across pairs and with an analog meter to check the deflection of the needle to determine if they are in phase
The phase rotation of motor should be always done from motor side i.e The motor terminal box.
You probably need a 5hp or 7hp motor. Look for HP rating o the 3 phase motor and select the same for single phase. 3 phase has same power but is more efficient at electricity use. Also consider a 3 phase converter. It allows a 3 phase motor to run on single phase service.
No, you only have phase a and b. The motor will run as smoothly as a 3 phase motor that has lost a leg of power. That is if the motor is designed for 208v in the first place. Not a good idea.
You still need the same horsepower. The advantage of the three-phase motor is that it will draw lower current.
Probably not. The single phase three horse power motor will be much larger in physical size than its three phase counterpart, and will probably not fit.
Yes, you can, and it won't burn out IF>>> the horsepower rating is the SAME. Pay attention to wiring and motor rotation. Also check the voltage: the motor voltage must be the same as the voltage between two hots of your 3 phase system. You will only use two hots as this is a single phase motor.
To convert a 3-phase air compressor to operate on 240V single-phase power, you'll need to replace the motor with a compatible single-phase motor, as 3-phase motors cannot directly operate on single-phase power. Additionally, you may need to modify or replace the starter and control circuitry to match the new motor's specifications. It's crucial to ensure that the compressor's electrical components are rated for single-phase operation, and always consult a qualified electrician for safety and compliance with local codes.
No. That would be a single phase motor.
We can convert a 3 phase ac motor into generator by changing phase sequence of the ac input cable of that motor
A synchronous motor can be a type of 3-Phase AC motor, or not.A synchronous motor is defined by the period of the rotor being synchronized with the frequency of the stator windings' current. The stator windings might be 3-Phase or not (2-Phase would work).Also synchronous motors are not the only type of 3-Phase AC motors. An induction motor could also be 3-Phase AC and has a few advantages and disadvantages over a synchronous motor.
by using dc volts across pairs and with an analog meter to check the deflection of the needle to determine if they are in phase
The winding design of the motor will not economically allow this to work. You would have to drive a 3 phase generator to supply it.
A 3-phase motor produces a steady torque that does not pulsate. A 3-phase motor starts turning in the right direction when switched on without the need for a separate starting winding.