0
What else can I help you with?
What formula is in a delta connected load or source in line voltage?
Formula for what?!
How do calculate secondary current of step down transformer?
The secondary current is determined by the load. So, divide the secondary voltage by the load impedance.
How you calculate the proper size of copper bus bar for 1200 Kw load?
You first have to find out what the load amperage is going to be and second, what is the working voltage.
How do you calculate full load in single phase circuit?
The question has to be more specific. Full load amps, watts or voltage. Please restate your question.
How can calculate the current of 3 resistors wired in parallel?
In this case, to get the equivalent resistance, first you use the parallel formula (1/R = 1/R1 + 1/R2) to calculate the equivalent resistors in parallel. Then you calculate the series resistance of this combination, with the other resistor.
How do you calculate line regulations?
no load voltage - full load voltage by full load voltage
What formula is in a delta connected load or source in line voltage?
Formula for what?!
What is the formula for calculating the full load current of 3kW motor?
The formula you are looking for is I = Watts/ Voltage, I = 3000/voltage.
How do you calculate dg current?
To calculate the DG set current, you need the load current and the load voltage. To convert it into kilowatts it is divided by 1000.
What is the formula to calculate the load on 2.5 square mm cable?
To calculate the load on a 2.5 square mm cable, you can use the formula: Load (in watts) = Current (in amps) × Voltage (in volts). The maximum current that a 2.5 mm² cable can safely carry depends on factors such as insulation type and installation conditions, typically around 20-25 amps for standard installations. To find the load capacity, multiply the maximum current by the voltage of the circuit. Always consult local electrical codes for specific guidelines and safety standards.
How do you calculate DG set current?
To calculate the DG set current, you need the load current and the load voltage. To convert it into kilowatts it is divided by 1000.
12 kilo watt how maney amps?
To convert kilowatts to amps, you need to know the voltage of the circuit. The formula to calculate amps is: Amps = kilowatts / (volts * power factor). For example, if the voltage is 120V, then the amps would be 100A for a 12kW load.
What is the formula for phase angle?
Phase angle is defined as the angle by which the load current leads or lags the supply voltage in an AC circuit. There are numerous ways to calculate a circuit's phase angle, so there is no 'formula' as such. For example, if you know a load's resistance and impedance, or its true power and apparent power, then you can use basic trigonometry to calculate the phase angle, and so on.
How do you calculate the load for a dc panel board?
Summation of individual load connected on the board gives the total load. Power (Load ) = Voltage x rated current.
What is the formula of load calculation?
There are various formula of load calculation. Power equals current multiplied by the voltage. Power can also be computed by multiplying the resistance by the square of the current.
How many amps in 40 kva?
To calculate the amperage of a 40 kVA load, you will need to know the voltage. The formula is: Amps = kVA / Volts. Assuming a standard line voltage of 120V, the amperage for a 40 kVA load would be approximately 333 amps.
What is the formula to calculate secondary current?
The secondary current is calculated by dividing the secondary current by the impedance of the load. This value shouldn't exceed the secondary-winding's rated current except for short periods of time.
