answersLogoWhite

0

What else can I help you with?

Continue Learning about Engineering

Installation of the drain pipe for the temperature and pressure relief valve?

It is the drain for the Temperature and Pressure relief valve (T&P valve, or TPV). It's function is to release pressure from the water heater if the pressure or temperature of the water exceeds preset limits. Do not cap off the pipe, or remove the T&P valve or alter it in any way. Doing so could cause serious injury or death! If you notice water dripping or running from the pipe, call a plumber to check it.


What is the function of back pressure valve in Boiler feed pump?

The function of back pressure valve is to prevent back flow to the pump in case there is an obstruction on downstream side of valve.


When do you know when a backflow pressure valve goes in your boiler?

You see and hear water flowing out of it's drain tube into the floor drain.


How do you drain water tank to build pressure?

To drain a water tank to build pressure, first, turn off the power supply to the tank and close the inlet valve to prevent further water flow. Next, open the drain valve at the bottom of the tank to release the water, allowing it to empty partially or completely, depending on your needs. Once the desired level is reached, close the drain valve and reopen the inlet valve to refill the tank, which will help build pressure as the water heats up. Finally, restore power to the tank.


Is there a shower drain with a built in check valve?

You can get a back water valve. It is similar to a check vale/ the back water valve goes on your main sewer line out side of home. It is desined to stop black water form coming into your home if main line stops up. Thay do make a device that can be installed into an exsisting drain it lets water through your drain but will not let water back up through you shower drain.

Related Questions

What is the function of the dishwasher drain valve and how can it be maintained for optimal performance?

The function of the dishwasher drain valve is to control the flow of water out of the dishwasher during the draining process. To maintain optimal performance, the drain valve should be regularly cleaned and checked for any clogs or obstructions. Additionally, using a dishwasher cleaner periodically can help prevent buildup and ensure smooth operation.


How do you drain your baseboard radiators?

If there is no drain valve at the radiator you can drain the system at the drain valve on the boiler


how do you drain the how tub?

There should be a drain valve where you can hook up a hose and then open the valve to drain.


What is the purpose of a drain vent valve and how does it function in a plumbing system?

A drain vent valve is used in plumbing systems to prevent airlocks and allow proper drainage. It functions by releasing trapped air in the pipes, ensuring smooth flow of water and preventing blockages.


What does a latco geyser valve do?

Never heard of that brand , but generally the only purpose of valves on tanks is to relieve high pressure. If this valve is piped down to floor or drain then that is definitely its function.


How to drain raditor?

bottom of rad you will see a small drain valve


What is a water drain valve on a jet ski?

It's a valve that allows you to drain the water from a jet ski. It's used after washing the bilge or to drain the bilge after riding.


Is my hot water heater leaking from the drain valve?

To determine if your hot water heater is leaking from the drain valve, check for water pooling around the valve or any visible signs of water dripping or leaking. If you notice these signs, it is likely that the drain valve is the source of the leak.


What is better a drain pump or a drain valve in a washing machine?

A"drain pump" machine uses a drain tube that is higher than the the level of water in the basin and therefore uses a mechanical pump to empty the tank overthat threshold pipe. A "dump valve" drain uses a mechanical valve at the bottom of the basin and simply opens to drain the tank.


How do you get to the radiator valve to drain coolant on a 2002 Dakota quad cab?

I have a 2001 4.7l. Mine had no drain valve on it. I just took off the lower hose and let it drain that way.


What is the purpose of a sink vent valve and how does it function in a plumbing system?

A sink vent valve is used to prevent airlock in plumbing systems by allowing air to enter the pipes, which helps water flow smoothly down the drain. It functions by equalizing air pressure in the pipes, preventing suction and allowing wastewater to drain effectively.


Where is the drain valve on a 2000 Explorer Sport?

The oil drain valve on a 2000 Ford Explorer Sport is located near the rear of the oil pan. The radiator drain petcock is located at the bottom the radiator.