0
What else can I help you with?
Why is a liebig condenser connected to a tap?
To keep the Liebig condenser cool so it can condense the vapour
What is the condenser approach?
condenser approach is heat transfer the water to gas of condenser efficiency is good less then below (2 F) the system is working good.
Why steem do not send to the boiler insuded of condenser?
In a typical steam system, steam is directed to the condenser instead of the boiler to remove heat and condense it back into water for reuse. Sending steam to the boiler would be inefficient, as it would require additional energy to convert the water back into steam again. The condenser allows for heat recovery and improves the overall efficiency of the system by recycling the condensate. This process also helps maintain optimal operating conditions and reduces water consumption.
Why does a static condenser differ from synchronous condenser?
Unlike a static condenser (capacitor bank), the value of reactive power from a synchronous condenser can be continuously adjusted. A synchronous condenser also has other advantages over static condensers such as: - not being affecting by harmonics (some harmonics can even be absorbed by a synch condenser) - producing no switching transients
Why is a condenser called a condenser?
The reason why it is called a barometric condenser is because it makes contact and it is a long vertical pipe into which it condensates and cools the liquid flow to accomplish the removal of pressure. It is also stated that when the pump is used the system is called a low level barometric condenser.
When was the Liebig condenser invented?
when the Liebig condenser was invented
Did Justic von Liebig invent the condenser?
Only the so-called Liebig condenser.
Why is a liebig condenser connected to a tap?
To keep the Liebig condenser cool so it can condense the vapour
What is a condenser named after a scientist?
Liebig condenser, Vigreaux column, Snyder column, West condenser, Allihn condenser, Graham condenser, Dimroth condenser, Friedrichs condenser. There are no shortage of these!
What temperature does water cool using the liebig condenser?
Water typically cools to around room temperature (20-25°C) when passing through a Liebig condenser, which is a type of water-cooled condenser used in laboratory settings to cool hot vapors and condense them back into liquid form.
Why was the liebig condenser named liebig?
The Liebig condenser was named after the German chemist Justus von Liebig, who designed and popularized it in the 19th century. Liebig made significant contributions to the field of organic chemistry, and his condenser design greatly improved the efficiency of distillation processes by using a long, straight tube to increase surface area for better heat exchange.
Why do you require a thermometer in a liebig condenser?
A thermometer is required in a Liebig condenser to monitor and control the temperature of the cooling water flowing through the condenser. This is important to ensure optimal cooling efficiency and to prevent overheating, which could lead to loss of condensation and inefficient distillation.
When was the liebig condenser discovered?
if i had the answer would i ask you
Who invented the Liebig condenser?
The Liebig condenser was named after Justus Baron von Liebig . Since grammar school he was very interested in science and he used chemicals from his fathers dry saltery buseness to help him with his
In Liebig condenser what will happen if the water flow from the upper part to the lower part of the condenser?
If the water flow in a Liebig condenser is reversed from its intended direction, the cooling efficiency will decrease and the condensation of vapor inside the condenser will be less effective. This can result in lower overall condensation efficiency and potentially affect the distillation process taking place.
Why is a graham condenser more efficient than a liebig?
More surface area.
What is the use of Liebig condenser?
A Liebig condenser is about the most simple condenser going. It has a gas or vapor pathway that is enclosed by a jacket of through which a cooling fluid (water, maybe) is passed. The cooling fluid cools the outer surface of the vapor tube and this cooling effect reaches the inner wall of the vapor tube to cool the vapor and cause it to condense. There are a couple of nice drawings that can be viewed by using the link to our friends at Wikipedia.
