To remove the starter motor from a MK1 Renault Laguna, first ensure the vehicle is safely parked and disconnected from the battery. Then, locate the starter motor, typically situated near the transmission. Remove any securing bolts and electrical connections, including the positive and negative leads. Finally, gently pull the starter motor away from its mounting position to complete the removal.
Need more detail... Which mk1 and which mk2? (Year/Engine/Spec/Box type, ie '83 1.8 GTI, Manual) Depends on gearbox fitted to either.
To remove the whole dashboard on a Laguna MK1, start by disconnecting the battery for safety. Then, remove any trim pieces and screws securing the dashboard, typically located around the instrument cluster and along the edges. Carefully detach any electrical connectors and cables, including those for the radio and climate controls. Finally, pull the dashboard away from the mounting points, ensuring all connections are free before completely removing it.
On the Mk1 model they are located in a panel under the steering column.
Take dashboard out, then remove surround around the stearing and remove to to far screws
Please read your question over, and ask again- but a Mk1 No4 and a Mk1 No4.........???
A Laguna 6-speed gearbox is not a direct fit for a 1.8 16v Clio Mk1 due to differences in mounting points, driveshaft compatibility, and overall design. While some modifications may be possible, such as adapting the mounts and ensuring proper alignment with the engine, it would require significant custom work. It's recommended to consult with a specialist or mechanic experienced in such swaps to assess feasibility and necessary modifications.
No, the Mk1 Renault Clio RSi was not fitted with the F3R engine. Instead, it was equipped with the F7P engine, a 1.8-liter inline-four that produced around 110 hp. The F3R engine was typically used in other models, such as the Renault Laguna and some versions of the Clio II.
On a MK1 Bravo it is on the indicator stalk assembly. You need to remove the surround (3 screws on the underside) and remove the steering wheel
REMOVE POWER TO ECU FOR MORE THAN 3 MINUTES.
Yes, albeit new engine and gearbox mounting need to be fabricated.
The best way to do that is open the door borrow another car, and drive into it its the fastest way to remove the door, then the rest is simple
There are many fireamrs that have Mk1 in their designation. Are you talking about a handgun or a long gun?