0
From the site: http://new.volvocars.com/ownersdocs/2001/2001_S60/01s60_11b.htm
License plate lights
* Switch off the ignition. * Loosen the screws with a torx screw- driver. * Carefully pull out the lamp housing. * Turn the bulb holder counterclockwise and pull it out. * Pull out the defective bulb and insert a new one. * Reinsert the bulb holder into the housing and turn it clockwise. * Reinstall the housing and screw it in place.
What else can I help you with?
How do I replace the license plate light on 1991 Volvo 240?
To replace the license plate light on a 1991 Volvo 240, first, locate the light assembly, which is typically found above the license plate. Use a flathead screwdriver to gently pry off the plastic cover or lens. Once exposed, remove the old bulb by twisting it counterclockwise and replace it with a new one, ensuring it’s securely in place. Finally, reattach the cover and check that the light is functioning properly.
How do you replace Volvo v70 license plate bulb socket?
You need a torx screwdriver....
How do you replace license plate light on 2006 Pontiac G6?
how do you replace license pate light on 2006 pontia g6
How do you replace license plate light 2002 530i BMW?
Unscrew license plate and remove to expose light fixtures. Wedge light module away from holes. Replace them and return them to sockets.
How do you change the license plate light on Oldsmobile Aurora?
It is very easy to change the license plate light on an Oldsmobile Aurora. All you need to do is remove the license plate and look above where the plate was. There are bolts that are holding the light in. Unscrew the bolts and then replace the light.
How do you replace the license plate light fuse for 1999 Mazda 626?
How do you change the liscence plate light fuse
How do you replace the license plate light bulb on a vw?
Remove the screws from the lens covering the bulb, pull out the bulb and replace it.
How do you replace license plate light on Audi A4?
Superdiscount LEDs has a tutorial out how to change the license plate light to an LED light. Its pretty general how to do but a lot easier with pictures. Heres to step by step links that should help you! http://www.superdiscountleds-how-to-install-leds.webs.com/ -OR- http://www.go-audi.com/14083-audi-q5-how-do-i-replace-license-plate-bulbs.html Source: www.superdiscountleds.com
How do you replace the light bulb of the license plate light of Hyundai tiburon?
there are two spots above the license plate where the lights go on each one there should be a spot where you can push the cover in and then just pull out at an angle
How do I change the license plate light in a 2002 Geo Tracker?
To change the license plate light on a 2002 Geo Tracker, remove the light lens with a small screwdriver. Take out the old bulb and replace with a new one. Tighten the screws on the light lens.
How do you replace the license plate light bulb on a 2008 Cadillac STS?
if your under miles its under warrenty
How do you replace the license plate light on a 2005 Toyota Sienna?
To replace the license plate light on a 2005 Toyota Sienna, you will first need to locate the light housing on the rear bumper near the license plate. Next, you will need to remove the screws or clips holding the housing in place using a screwdriver or a trim removal tool. Once the housing is removed, you can access the old light bulb, twist it counterclockwise to remove it, and replace it with a new bulb of the same size and wattage. Finally, reattach the housing and secure it back in place with the screws or clips.
