You changed your battery in your 2002 VW Jetta, and lost the radio? No Problem... (as they would say in Jamaica).
If you are the legitimate owner of the car, you should have the four digit Radio unlock Code saved somewhere with the manuals or better yet, have a file at home for that (would not recommend to keep it in the glove compartment). Switch ON the radio, the "SAFE" letters will appears on your display, followed by 1000. Using your Preset Channel buttons, change the numbers to match your Unlock Code. Depress #1 is for the first digit, #2 is for the second and so on. When all four numbers are set, press the right arrow ">" on the Tuning (FF) button. This is all it takes.
Enjoy
Lackota
Howdo i reset my radio security code ml 500 2002
The reset code is specific to the radio. Look in and on the glove compartment for the code and in the owners manual. If it is not there you need the serial number of the radio and have to call the dealer for the code.
I have a 2002 cadillac dts and the radio will not come on. Is there a code to reset it.
No I can't answer this, but I have the same question. The battery has been diconnected and the reset code is doing nothing. The 2003 TDI Jetta does not have an option to use the radio speakers for a phone... so what's up?
You can not unlock the radio without the code. You can remove the radio and get the serial number from it and call the dealer for the unlock code.
you need to contact a dealer and get the code for your car.
To reset the radio code on a 2002 Mercedes SLK 320, you typically need to turn on the ignition without starting the engine, then turn on the radio. If the radio displays "CODE," you can enter the code using the radio buttons. If you don't have the code, you may need to refer to the owner's manual or contact a Mercedes dealership for assistance, as they can provide the necessary code based on your vehicle's VIN.
There is nothing to reset except the radio station presets and possibly radio code if the radio has a theft deterrent feature. Nothing else for you to do.
the radio code is on the back of the radio. take the radio out and you can see it.
To reset the radio code for a 2002 Acura MDX, first, turn on the vehicle's ignition without starting the engine. Then, turn on the radio, which will display "CODE" if it is locked. You will need the radio code, which can typically be found in the owner's manual or on a card provided with the vehicle. Enter the code using the radio preset buttons, and if entered correctly, the radio will unlock and function normally. If you don't have the code, you may need to contact an Acura dealer with your vehicle's VIN to retrieve it.
Check the owner's manual, or go to the dealer. These will be your only resources. strangley enough after i did the power window reset my radio turned right on.
The code is usually found on a small card and could be in or around the glove compartment. If it is not there you have to obtain the serial number of the radio and call the dealer for the code.