0
The cost to replace an engine electrical harness in a 1999 BMW Z3 typically ranges from $1,000 to $2,500, depending on factors like labor rates, parts availability, and whether you choose OEM or aftermarket parts. Labor can be time-consuming, often requiring 6 to 10 hours of work. It's advisable to get quotes from multiple mechanics or dealerships to find the best price.
What else can I help you with?
How do you replace idm on 99 f350 7.3?
To replace the IDM (Injection Driver Module) on a 1999 Ford F350 with a 7.3L diesel engine, first disconnect the battery to prevent electrical shorts. Remove the engine cover and locate the IDM, which is typically mounted on the driver's side of the engine. Unplug the wiring harness connected to the IDM, unbolt it from its mount, and replace it with the new unit. Finally, reconnect the wiring harness, reattach the engine cover, and reconnect the battery.
Will an 2005 f150 engine computer and wire harness and engine work in a 1999 f150?
i seriously doubt it. there have been several engine modifications to the the Triton v8s since 1999.
Can you replace a dual overhead cam engine in a 1999 Saturn SL2 with a single overhead cam engine made for the same car?
Yes you can but you will have to swap out the wiring harness and the on board computer as well. Otherwise it just won`t start.
How do you Replace crankshaft on 1999 mercury villager?
You don't, you replace or rebuild the engine.
How do you replace the knock sensor on a 1999 Nissan Quest?
To replace the knock sensor on a 1999 Nissan Quest, first, disconnect the battery to ensure safety. Then, locate the knock sensor, which is typically situated on the engine block. Remove the electrical connector and unbolt the sensor using the appropriate socket or wrench. Install the new sensor, reconnect the electrical connector, and reattach the battery before starting the engine to check for proper operation.
Where is the glow plug relay on a 1999 ford 7.3 diesel?
The glowplug relay is located on the top of the engine, to the left of the fuel filter housing. It looks like a small metal box mounted on a bracket with an electrical harness attached to it. The wiring harness will have one branch come from the rear of the engine and two that seem to enter the valve covers. The glowplugs are mounted underneith the valve covers on the 1999 7.3 ltr and are energized by the relay.
Does a 1999 ford escort 4 cylinder 2.0 liter engine have an interterence motor or not?
NO! The 1999 Ford Escort 2.0 liter is not an Interferance engine. Replace the belt at 120,000 miles.NO! The 1999 Ford Escort 2.0 liter is not an Interferance engine. Replace the belt at 120,000 miles.
When replace timing belt Toyota Sienna 1999?
Replace it every 90,000 miles. Warning: This is an interference engine. If the belt breaks serious engine damage will occur.Not true, 1999 Sienna DOES NOT have an interference engine
Can you replace 4.6 northstar engine in a 1999 deville with a 2004 4.6 engine?
Yes
How do you replace a knock sensor diagram on 1999 Lexus rx300?
To replace the knock sensor on a 1999 Lexus RX300, first, disconnect the negative battery terminal to prevent electrical shorts. Then, remove the intake manifold for better access to the knock sensor located on the engine block. Disconnect the wiring harness from the sensor, unscrew it using the appropriate socket, and install the new sensor by reversing the process. Finally, reassemble the intake manifold, reconnect the battery, and check for any error codes.
How do you remove and replace a 2.5L engine in a 1999 Suzuki Grand Vitara?
To remove and replace a 2.5L engine in a 1999 Suzuki Grand Vitara, first disconnect the battery and drain the engine coolant and oil. Remove components such as the air intake, exhaust manifold, and any accessories attached to the engine, including electrical connections and hoses. Next, unbolt the engine from the transmission and lift it out using an engine hoist. To install the new engine, reverse the removal process, ensuring all connections are secure and fluids are refilled.
How do you replace the piston rings on a 1999 Saturn SL2?
If you are mechanically inclined it is cheaper to replace the entire engine
