This is the link to a page for coccyx cushions which help protruding tailbones, copy and paste it into your search bar at the top center region of your internet browser page. http://www.allegromedical.com/browse/browseProducts.do?searchPhrase=coccyx&002=2090960&004=1076569908&005=132869300&006=2980322268&007=Search&008=&gclid=CLu58_zC15sCFRJxxwodWFJbnw
The discomfort you feel in your tailbone while riding your bike may be due to the pressure and friction placed on that area from the bike seat. The design and positioning of the seat can cause strain on your tailbone, leading to discomfort or pain. Consider adjusting the seat height or angle, or investing in a seat with better cushioning to alleviate the pressure on your tailbone.
Lucky you. Remove the back seat cushion and remove the maintenance cover. However... To remove the seat cushion, you need to remove the seat backs first. *DO NOT* try to pop the seat cushion off its hooks at the front. You will wreck the cushion and its hooks. Once the seat backs have been removed, you can undo the single bolt at the middle-back of the cushion, at which point the cushion pivots up and forwards to disengage the hooks.
The battery is under the rear seat cushion. # Push in and up on the front of the rear seat cushion. # Lift up and out on the seat cushion. # Remove the rear seat cushion from the vehicle
the easy way is to un clip the seat the clip is located under the front seat cushion by filcking the wire clip back its a wire clip lift cushion off then there are four bolts which unbolts seat to frame you will need to unplug wiring for seat motor you will see when you remove cushion then lift seat out
Reach down in the bite-line (where the seat cushion and the seat back meet). Pull up on the seat cushion until the cushion raises above the bottom of the seat back. Pull the seat cushion towards the front. There are two metal tabs that are hooked into the front of the seat cushion that holds it in place; unhook these by moving the cushion forward. To replace, reverse the procedure, but make sure the seatbelt recepticles are exposed before pushing the seat cushion down into the bite-line.
In many of the larger GM cars like the Bonneville, the battery is located under the back seat cushion. Need to take out the seat cushion and you will see it mounted in the middle...
* Working at the front of each seat cushion push the retaining tabs in then lift up on the front edge of the cushion and release the seat cushion retaining tabs. Remove the cushion from cushion from the vehicle * Detach the retaining bolts at the lower edge of the seat back * Lift up on the lower edge of the seat back and remove it from the car
The heated seat elements are located between the cushion and the seat cover.The heated seat elements are located between the cushion and the seat cover.
unscrew the bolts and take the seat out
under rear seat cushion there are fuses you can remove pass side push on seat lift up cushion
It should be under the rear seat on the passenger side. You need to lift up the seat bottom cushion to get to it.
One could order a cushion for a bench window seat from the Cushion Source website. They will customize your order to match the furniture you already have.