0
What else can I help you with?
What is the relationship between engineering strain and percent elongation?
strain is percent elongation/100; for example a strain of 0.02 is 2% elongation. Often we refer to elongation at failure; for example if a material fails at 10% elongation its strain is 0.10
Strain-stress diagram of copper and steel?
difference between Strain-stress diagram of copper and steel?
What is hysteresis loop in stress and strain?
the leading or lagging between the stress and strain is called hysteresis loop
Describe stress strain relationship for a loaded steel wire?
F = {YA(dl)}/L Stress = Restoring Force/Area Stress = {Y(dl)}/L (Strain) x (Y) = Stress Strain = (dL)/L Y : Young's Modulus A : Area dL or dl : Change in length
Is flexural modulus the same as bending stiffness?
It is related. Flexural modulus is the modulus of elasticity (E) in bending and the higher it is the higher the bending stiffness. Technically, bending stiffness is the product of the flexural modulus and the material bending moment of inertia, I, that is EI.
What assumption are made in theory of simple bending?
Assumptions The beam is symmetrical about Y-Y The traverse plane sections remain plane and normal to the longitudinal fibres after bending (Beroulli's assumption) The fixed relationship between stress and strain (Young's Modulus)for the beam material is the same for tension and compression ( σ= E.e )
What is the relationship between stress and strain in materials under mechanical deformation?
The relationship between stress and strain in materials under mechanical deformation is described by Hooke's Law, which states that stress is directly proportional to strain. This means that as a material is subjected to a force (stress), it will deform (strain) in a predictable and linear manner. The relationship between stress and strain helps engineers and scientists understand how materials behave under different conditions and can be used to predict their mechanical properties.
What is the relationship between stress and strain according to Hooke's Law?
According to Hooke's Law, the relationship between stress and strain is linear. This means that the amount of stress applied to a material is directly proportional to the resulting strain it experiences. In other words, as stress increases, strain also increases in a predictable and proportional manner.
What is proper bending and fitting bending and kneeling?
Proper bending involves maintaining a straight back and bending at the knees and hips instead of the waist to lift objects. Fitting bending is adjusting the height of work surfaces and tools to reduce strain on the back. Kneeling is an alternative position to reduce strain on the lower back when working at low heights.
How does the relationship between stress and strain affect the behavior of materials under mechanical loading?
The relationship between stress and strain determines how materials respond to mechanical forces. Stress is the force applied to a material, while strain is the resulting deformation. When a material is subjected to stress, it deforms or changes shape, which is known as strain. The behavior of materials under mechanical loading is influenced by how they respond to stress and strain. Materials can exhibit different properties such as elasticity, plasticity, and brittleness based on their stress-strain relationship.
What does the strain vs stress graph reveal about the relationship between strain and stress in a material under mechanical loading?
The strain vs stress graph shows how a material responds to mechanical loading. It reveals that as stress increases, strain also increases, but not necessarily in a linear manner. The relationship between strain and stress can vary depending on the material's properties and behavior under different loading conditions.
What is the relationship between stress and strain in the field of physics?
In physics, stress is the force applied to an object, while strain is the resulting deformation or change in shape. The relationship between stress and strain is described by the material's stiffness, known as Young's modulus. This relationship helps scientists understand how materials respond to external forces and can be used to predict their behavior under different conditions.
What is the stress vs strain formula used to calculate the relationship between the applied force and resulting deformation in a material?
The stress vs strain formula is used to calculate the relationship between the applied force and resulting deformation in a material. It is expressed as stress force/area and strain change in length/original length.
What is the relationship between compression stress and strain in materials under load?
Compression stress is the force applied to a material that causes it to compress, while strain is the resulting deformation or change in shape of the material. The relationship between compression stress and strain in materials under load is typically linear, meaning that as the stress increases, the strain also increases proportionally. This relationship is described by the material's compression modulus, which is a measure of its stiffness under compression.
What is the relationship between engineering strain and percent elongation?
strain is percent elongation/100; for example a strain of 0.02 is 2% elongation. Often we refer to elongation at failure; for example if a material fails at 10% elongation its strain is 0.10
How does the field of physics explain the relationship between stress and strain in materials?
In physics, stress is the force applied to a material, while strain is the resulting deformation or change in shape. The relationship between stress and strain in materials is explained by the concept of elasticity, which describes how materials respond to stress by deforming and returning to their original shape when the stress is removed. This relationship is typically represented by a stress-strain curve, which shows how a material deforms under different levels of stress.
What is the relationship between volume strain and the deformation of a material under stress?
Volume strain refers to the change in volume of a material when it is subjected to stress. When a material is deformed under stress, it can experience volume strain, which is the result of the material's particles moving closer together or farther apart. The relationship between volume strain and deformation is that as the material deforms, its volume may change due to the stress applied to it.
