diagonal cutting pliers
There is a tool called easy out.
To thread PVC pipe for plumbing purposes, you will need a pipe threader tool specifically designed for PVC. First, cut the PVC pipe to the desired length using a saw. Next, apply a lubricant to the end of the pipe to make threading easier. Insert the pipe into the threader and turn the handle clockwise to create the threads. Be sure to thread the pipe to the appropriate depth for a secure connection.
To thread a PVC pipe, you can use a pipe threading tool to create grooves on the end of the pipe. This allows you to screw on fittings or connectors securely.
The tool for cutting internal threads is called a tap. A tool for cutting external threads is called a die.
We use a die of the proper size to cut threads on steel pipe. This pipe die can be turned by hand, or by machine. There are examples of this process in any good hardware or large home improvement store. They have pipe threaders on the premises, and they can thread most common pipe stock.
A tool commonly used for threading rigid conduit is a pipe threading machine or a manual pipe threader. These tools create screw threads on the ends of the conduit, allowing for secure connections with fittings. For smaller jobs, a handheld die and handle can also be used to manually thread the conduit. Proper threading ensures a tight fit and helps maintain the integrity of electrical installations.
A nipple driver tool is used in plumbing installations to tighten or loosen pipe nipples, which are short pieces of pipe with male threads at both ends. The purpose of a nipple driver tool is to make it easier to install or remove pipe nipples in tight spaces where a wrench or other tools may not fit. The tool typically has a handle and a socket that fits over the pipe nipple, allowing the user to turn it with leverage to secure or loosen the connection.
Taps and dies are are tools for cutting threads in metal. A tap is a bolt like tool for making for making female threads ,a die is a nut liked tool for making male threads. They are used for cutting internal and external threads
is when you re-cut the threads in a bore using a die tool that is struck and then turned to make the threads
A tool commonly used to latch onto the drill string while hoisting or lowering drill pipe is called a "pipe ram" or "pipe wiper." This tool is typically part of the blowout preventer (BOP) system and is designed to create a secure seal around the drill pipe, allowing for safe and efficient operations. It helps prevent the escape of fluids and maintains well control during drilling operations.
A. Tap
The chasing dial on a lathe is used to assist in producing threads without the need for a thread-cutting tool. It allows the operator to engage and disengage the lead screw at precise intervals to create threads on the workpiece.