To add coolant to a Honda Shadow 750, first ensure the engine is cool and locate the coolant reservoir, typically found on the right side of the bike. Remove the cap and check the coolant level; if it's low, use a 50/50 mix of distilled water and the appropriate motorcycle coolant. Slowly pour the mixture into the reservoir until it reaches the recommended level, then replace the cap securely. After adding coolant, run the engine briefly and check for leaks before taking your bike for a ride.
There is a coolant reservoir in the center of the bike.About where the front of your seat is,but down low.Get on the ground and you can't miss it.
For the 1997 thru 2007 Honda Shadow VLX 600 use a 50-50 mixture of distilled water and ethylene glycol for maximum corrosion protection. DO NOT USE alcohol-based antifreeze or an antifreeze with self sealing propreties. Add the coolant at the reserve tank. For the 1997 thru 2007 Honda Shadow VLX 600 use a 50-50 mixture of distilled water and ethylene glycol for maximum corrosion protection. DO NOT USE alcohol-based antifreeze or an antifreeze with self sealing propreties. Add the coolant at the reserve tank.
To check the coolant level on a 2006 Honda Shadow, first, ensure the engine is cool and locate the coolant reservoir, which is typically found on the right side of the motorcycle near the radiator. The reservoir will have markings indicating the minimum and maximum levels. Open the cap and visually inspect the coolant level; it should be between these markings. If the level is low, you may need to add the appropriate coolant mixture to reach the recommended level.
try punch start first...
Under the right side of the false tank there should be a reservoir you can add coolant to that is connected to the radiator.
To add coolant to your 2004 Honda Rancher, locate the coolant reservoir, which is typically found near the radiator. Remove the cap and check the coolant level; if it's low, add a mixture of antifreeze and water according to the manufacturer's specifications. Ensure the engine is cool before adding coolant to avoid burns. After adding, securely replace the cap and check for any leaks.
I don't think the basic shadow came with one, if you add saddle bags and such then you have storage
To check the coolant level in a 2004 Honda Shadow motorcycle, locate the coolant reservoir, which is usually found near the radiator. Ensure the engine is cool, then look for the minimum and maximum level markings on the side of the reservoir. If the coolant is below the minimum mark, you can add a 50/50 mixture of distilled water and antifreeze to bring it up to the proper level. Always check for leaks and ensure the cooling system is functioning correctly.
Coolant is added to the overflow bottle instead of the radiator. The overflow bottle will allow fluid to fill over into the radiator.
To check the coolant level on a Honda Rancher 350, first ensure the engine is cool. Locate the coolant reservoir, typically found near the radiator, and inspect the level against the markings on the side of the reservoir. The coolant should be between the "low" and "full" marks. If necessary, add the appropriate type of coolant to reach the correct level.
add water or anti-freeze coolant
how to add coolant to 1991 lumina?