Check the release switch that connects to the brakes. On many vehicles the brake light switch will cause the cruise to disengage. Next time, try pulling up on the brake pedal when you engage cruise. If it works when you're pulling up, you might be able to adjust the switch. It's physically connected to the brake pedal.
grip it firmly and pull it straight out,new one pushes back in.
its an 86 chevy silverado
Front Speaker 6.5 4 Front Tweeter 1 1 Rear Speaker 4X6 2.5
under the dash at the arm for the pedal its more than likely black & white
If your Silverado is like most other cars today, it will use vacuum hoses to change the distribution between each setting. The vacuum in the hoses is created usually by the engine, and transferred to the switch you use in the cabin. Now if there is a slight split or crack in one of the hoses or one is loose this will lose the vacuum, which is why it will not change setting because there is no negative pressure to force the setting to change.
BROKEN CRUISE CONTROL CABLE (CHECK AT THROTTLEBODY AND FOLLOW TO TRANSMISSION)
There is no kick down cable on a 2002 Silverado. You TCM (transmission control module) controlls downshifts. Also, the cruise control, has a module that does it's thinking and is non-ajustable.
What all does the ECM computer control on my 2006 Chevy k1500 Silverado
check the fuse. My 1996 manual says it is number 18
answer: cruise control 86 Chevy capriceI think it is the button on the end of the wiper control.
How do you change the ignition control module in a 1988 Chevy Silverado 5.7L
grip it firmly and pull it straight out,new one pushes back in.
The ECM is what controls all the electronics in a truck. The is what controls it in all cars.
yes, mine has cruise contol
the cruise control is broken....
no.
The Chevy Cavalier cruise control fuse location is dependent upon the year of the automobile. The cruise control fuse will be in the fuse box. The exact location will be on the inside cover of the fuse box.