by bying one !!!!!!!//////////if it is a replacement radio go to the place that sold it to you or a junk yard
Newer radios are programmed with the VIN of the car they are in. If you have to replace the radio with a factory radio, you have to take it to your local dealer, and have them reprogram it. They might require you to show proof that the new radio is bought, and not stolen thou. But the new radio has to be unlocked thru the OBD2 port thru a GM scanner.
Replace the radio.
You'll have to reprogram the radio code into the radio. This is done to prevent use of a stolen radio. The code should be in your owners manual or the dealership can get it for you.
To find the serial number on an HD radio, look at the back or bottom of the radio. In most cases, the serial number is marked SN and is located on a small plate or tag at the bottom or back of the radio.
you will need to unscrew your dash and pull off the front plate of your dash, then you will need to unscrew the stock radio, then you will need to go ahead and pull out the adapter from the back of your radio.-Shocker
Replace it with a new radio or use car insurace
His radio invention.
Replacing a car stereo is not a difficult process. All you need to do is take off the face plate, unscrew the radio, and unhook the wires. Then place the new stereo in, hook up the wires, screw the new stereo in, and replace the face plate.
Replace the radio.
Depending on wich Saturn its really easy just pop off the dash around the radio remove the screws take out your radio unplug the wires and buy a new radio w/ wiring harness and face plate.
Cant you have to replace the entire radio
The bulbs can be replaced for the radio and heater controls on a 2000 Windstar SE by removing the plate over the heater controls. Some models need an Allen wrench for this and some models will need a Star wrench to remove the screws holding this plate on.
youll most likely have to replace the whole radio. from what ive been told it would cost the same or more just for the faceplate alone.
The "Related Questions" below add up to a full tutorial / how-to on installing a radio into a Taurus / Sable.Be sure to focus on the one for removing a radio from the 1986-1995 Taurus/Sable - not the other one about a converter plate as it doesn't apply to your '95.
Newer radios are programmed with the VIN of the car they are in. If you have to replace the radio with a factory radio, you have to take it to your local dealer, and have them reprogram it. They might require you to show proof that the new radio is bought, and not stolen thou. But the new radio has to be unlocked thru the OBD2 port thru a GM scanner.
install a radio
how do you replace the radio light bulb