you must first pop the bezel off. there will be 2 screws over the gauges that will need to be removed also. there are 4 screws on the outside corners of the radio and 4 screws on the temperature controls. you will need to take all of these out and the radio will fall out. remove the CD holder from the sides and back and you are done.
Wiki User
∙ 2011-09-12 20:35:59you cant you cant
im trying to find out the same thing
how do you remove the stock radio on a 1996 lexue es300
Begin by removing the decorative radio retaining cover. Remove the radio retaining screws. Slide the radio out, remove the wiring harness and the antenna cable from the back of the radio.
Try www.streetdreams.com
you cant you cant
im trying to find out the same thing
If they are stock then there electric.
how do you remove the stock radio on a 1996 lexue es300
Probably a turbo 350.
Begin by removing the decorative radio retaining cover. Remove the radio retaining screws. Slide the radio out, remove the wiring harness and the antenna cable from the back of the radio.
read the manual that came with the radio or ask a friend that is good with cars!!
You pull out the Stock radio and buy a box to put in in then remove the center dash peice by pulling the bottom and cafully the top. then you can undo the wireing clip behind that and by a new center peice that is made for a radio.
yes you can remove the stock radio and put in an aftermarket radio in the chevy s10. I have a 1990 s10 pickup. You will have some extra unconnected wired with the aftermarket radio but do worry it will work all the same. the wires are color coded to match each other for the most part except for the speaker wires they may be different but will be labeled on the new unit as to what is what. good luck hope ive been helpfull
Try www.streetdreams.com
Not on my 2006 Uplander.
the seatbelt chime and door chime is hooked up to the stock radio in all gm vehicles just find somebody that knows car steros