answersLogoWhite

0


Best Answer

Check around the trailer connector for a short; plus under the bumper is a harness that splits off the taillights so take a circuit tester and check for shorts here also. turn signal switch assembly worn out try another one third light is not wired throguh this switch but the two brake lights are the switch cancels the brakes for turn signals and hazards, it wears out eventually

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What would cause brake lights to not work on a 95 Jimmy but the third brake light works just fine and tail light bulbs are not blown and turn signals work as well?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is wrong when the brake lights and signals don't work?

Blown fuse


1994 Chevy silverado all 3 brake lights and tail lights don't work but signals do?

if the tail lights work but not brake lights then its most likely just a blown fuse or it could be the switch at the top of your brake pedal arm.


Why do your brake lights not work but your turn signals and rear window brake light do?

If the center one works then it will almost certainly be 2 Blown globes.


What will cause brake lights not to work or running lights do have turn signals?

A blown bulb. Check fuses and then start replacing the bulbs one by one.


GMC JIMMY why are your dash tail and parking lights not working but the brake blinker and head lights work fine?

The GMC dash tail and parking lights are on a different fuse from the brake lights. Check the fuses for a possible blown fuse.


On a 1990 olds 98 the problem is no brake lights or taillights i do have headlights and turn signals thanks?

If you have no brake lights or tail lights then you've probably got an electrical problem. Check the fuses first and see if you have one or more blown.


Why don't your brake lights work on your Chevy s-10?

You may have blown a fuse. You may have to replace your brake light switch which is located above the brake pedal under the dash. Also it could be your emergency flasher knob if its broken. All of your turn signals and break lights run through it and if the connections on it are off none of the brake lights and turn signals will work.


You have no brake lights or turn signals on 97 Lincoln town car?

You may have blown a fuse. Check your fuses. Then you can check your light connections.


Tail lights and dash lights not working in 2000 alero - reverse brake and turn signals are ok any help would be appreciated?

Blown fuse or bad headlight switch


Why would 1998 Grnd Marquis turn signals and brake lights quit working brake light in rear window works and curb lights work for left and right turn?

blown fuse or turn switch bad


My brake lights or turn signals don't work on my Cadillac deville?

How do you replace brake lights


What causes no brake lights 1999 dodge ram have flashers turn and running lights?

Possibly blown fuse, bad brake light switch, or blown brake light bulbs.