The equation that you are looking for is; amps when kilowatts are known. kW x 1000/1.73 x Volts x pf.45 x 1000 = 45,000/208 x 1.73 x pf. Power factor to use will be .9. 45000/ 324 = 139 amps.
The equation that you are looking for is Amps = Watts/Volts. There are 6000 watts in 6kW.
A volt is the unit of electric potential, an amp is the unit of electric current, and a watt is the unit of power. The relationship between them is described by the equation: Power (in watts) = Voltage (in volts) x Current (in amps).
A volt-amp or VA is equivalent to watts, provided the voltage and amperage are in phase. So 1 kilo volt amp is the same as 1 kilowatt. Wattage, or power, is equal to volts times amps. So the original question is effectively nonsense. The number of amps depends on the voltage. If the voltage is 1000 volts, then there's 1 amp in 1 kilo volt amp. If the voltage is 1 volt, then there's 1000 amps. If there's 50 volts, then the amperage is 20 amps. And so on.
The formula you are looking for is Amps = kW x 1000/1.73 x E x pf. Use .84 for a power factor value.
To calculate the amperage, use the formula: Amps = Watts / Volts. For a 3000-watt load on a 220-volt AC single-phase circuit, the amperage would be approximately 13.6 amps.
62.5 amps
Volt amps is the same way of saying watts. This is seen in the formula Watts = Volts x Amps. Using the formula I = W/E we transpose I = 20000/240 = 83.33 amps.
88 amps
The equation that you are looking for is Amps = Watts/Volts. There are 6000 watts in 6kW.
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
Volt Amps [volts times amps] is used for reactive and apparent power. Watts (dimensionally the same as volt amps) is used to indicate real power.AnswerReactive power is measured in reactive volt amperes (var).
read the name plate on the motor
Current in 200kw at 480 volts = 200,000/480 = 416.667 amps
Depends on the battery. It is listed on the battery as Cold Cranking Amps (CCA).
A volt is the unit of electric potential, an amp is the unit of electric current, and a watt is the unit of power. The relationship between them is described by the equation: Power (in watts) = Voltage (in volts) x Current (in amps).
Volts is the unit measurement for voltage Current is amperes or amps for short Resistance is ohms