answersLogoWhite

0

A fast and loose pulley system consists of a pair of pulleys, one fixed (fast) and one movable (loose). The loose pulley can be engaged or disengaged to change the speed or direction of the driven mechanism without affecting the driving mechanism. This system allows for quick adjustments and versatile operation in machinery.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Physics

In the picture below if pulley A is moved clockwise what direction and how fast will pulley C turn?

If pulley A is moved clockwise, pulley C will also turn clockwise at half the speed of pulley A due to the belt connection. This is because pulley C has a larger diameter than pulley A, causing it to rotate slower while maintaining the same linear speed.


In the picture below if pulley A turns clockwise at 15 rpm how fast and in what direction will pulley B turn?

Pulley B will turn counterclockwise at 15 rpm since it is connected to pulley A by the belt. Both pulleys will turn at the same speed since they are connected by the belt.


How does a movable pulley look like?

A movable pulley consists of a single pulley that moves up and down along a rope or cable. It is typically attached to the object being lifted, while the other end of the rope is anchored in place. When force is applied to pull on the loose end of the rope, the object attached to the pulley is lifted.


In the picture below if a twisted pulley A turns clockwise at 15 rpm how fast and in what direction will pulley B turn?

Pulley B will turn counterclockwise at 15 rpm since it is connected to pulley A with a twisted belt. The direction of rotation is opposite between the two pulleys due to the arrangement of the twisted belt.


How does pulley size on a supercharger change the boost?

Using a larger pulley on a supercharger will reduce the boost pressure because the supercharger will not be spinning as fast. Conversely, using a smaller pulley will increase the boost pressure as the supercharger will spin faster. It is important to carefully select the pulley size to achieve the desired boost level without overworking the engine.

Related Questions

Why if bad pulley your car not start?

Well to start with the question is a bit vague. A pulley has nothing to do with a start operation; a loose pulley may cause the belt not to turn fast enough to charge the battery and that's as far as it goes. Check your belt tension. If loose tighten it. That's All


Why does 1995 Toyota Tacoma pulley keeps coming loose why Tacoma?

i have a 1998 Toyota tacoma pickup the pulley is loose on it does it free float or what


What causes clanking on bottom crank shaft pulley to rattle?

its loose tighten the pulley


Will the pulley on a power steering pump get loose when it is going bad?

If you mean the pulley and the shaftit is mounted on, Yes! A loose belt on the pulley doesn't necessarily mean anything but a need to adjust the belt tension.


How do you replace an air conditioning belt on an Avalanche?

You will need to loosen the tensioner pulley. When the tensioner pulley is loose the air conditioning compressor belt will become loose. Put the new belt on and tighten the tensioner pulley.


How do you replace an alternator belt on a 1987 SAAB 900?

You will need to loosen the alternator belt with the tensioner pulley. When the tensioner pulley is loose the alternator belt will become loose. Put the new alternator belt on and tighten the tensioner pulley.


A pulley on front of motor is loose but i don't know the name of it it's right above the tension pulley?

If it does not drive anything it could be an idler pulley.


How do you change the serpentine belt on a 1998 Chevy 1500 5.7?

You can change the serpentine belt by loosening the tensioner pulley. When the tensioner pulley is loose and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.


Is slim fast good for athletes?

if i drink slim fast to loose fat will i loose my muscle to


How do you change ac belt on gmc Yukon?

Loosen the tensioner pulley. When the tensioner pulley is loose the belt will come off. Put the new belt on and tighten the tensioner pulley.


What can cause a rattle noise from the power steering pump?

loose or defective belt, loose or damaged pulley, debris in pulley groove, loose or broken pump mounting bolts, worn pump bearings, low fluid level, incorrect fluid, loose reservoir cap,belt tension too tight,


What are the ratings and certificates for Fast and Loose - 1954?

Fast and Loose - 1954 is rated/received certificates of: USA:Approved