Airsoft Guns and Accessories

A person can purchase a P90 airsoft gun from a store that sells various toy guns or online. Some online sites that have the P90 airsoft gun available for sale include Amazon, AirSplat, and HobbyTron.

yes, any gun can pierce any object-it merely matters on what type of object you are attepting to pierce and its thickness and the projectile or ammunitions hardness, velocity and shape

Overall, the quality of a standard .20g BB is usually substantially higher than that of a .12g.

However, if you are just plinking with a very-low end (cheap) gun, you shouldn't worry about using a .12g BB.

It is a source of power airsoft guns can run on. There are different power sources for most guns, such as spring, electric and gas. There are many different types of gas such as co2, propane, and green gas.

In the state of Tennessee, it is illegal to shoot/discharge a projectile within a municipality.

It is very unlikely to kill someone with an airsoft gun at 500 fps. Normally, you could possibly give them a welt or possibly even pierce their skin(only slightly). You could NOT kill them, but you could give them a severe wound(unless of course, you held the gun like right IN their ear,eye, or even chest area and repeatedly fired rounds, and by repeatedly, like at least 50 shots). Unless you are really cruel and play like that, you cannot kill someone. Remember to wear glasses or goggles and if you're just fooling around in your backyard, your friends probably won't want to play with you if its that powerful. Go for a gun under 400 unless it's a sniper

You can try http://www.6mmbb.com/servlet/the-1027/Swiss-Arms-SA1-Airsoft/Detail

or just do a search engine search for it. A gun under $100 will not be very good.

It depends who makes the magazine and who makes the gun. It should say in the magazine's description (on the website) which guns and which companies it works with. If it doesn't say anywhere just call the company who makes the magazine or the company who makes the gun.

THe most dangerous airsoft gun is probably any of the Systema PTW series if they have the highest power cylinder. With it they can shoot at approximately 700 fps. A highly moded gas sniper rifle may also be able to achieve similar power, but I am not aware of any other airsoft gun that can shoot over 500 fps stock. Also, the Systema PTW has an absurdly high rate of fire, so it can deliver bb after bb. Most people who use these guns us weaker cylinders though, so in an airsoft game you will never have to worry about anything over 500 fps, and most guns will be around, if not lower, than 400 fps.

Airsoft guns are not waterproof. If you have one that is electric it will stop working if it gets to wet. If you have a manual one and it gets wet, it should still work.

Not likely. Airsoft guns were designed not to penetrate skin.

A retail price airsoft m1 garand costs about $800. The price for one now has increased due to the fact that they are almost impossible to buy online unless someone is selling one used which I have seen sell at around a minimum of $1200 USD. I happen to own one that is made from real wood and metal. If you are interested shoot me an email at (paintballer4860@aol.com)

"Academy Sprorts and Outdoors" has a $20.00 electric airsoft gun.

Also, if you go to Google shopping and search "airsoft pistol," you go to the bottom of the page and click "$0 to $20," it will pop up a whole bunch of pages on airsoft guns.

(although i don't trust them, i have seen a whole bunch of reviews saying they break after a couple uses. not nessesarily all airsoft guns, just the really cheap ones.)

(oh, by the way, the one at academy i haven't tried it so I'm not promising anything...)

Also there are online scource's such as hobbytron.com and airsplat.com... these are cheap and i have gotten some off those 2 sites

You have to troubleshoot.

If the gearbox is clicking but not shooting, it's either a bad battery or a bad motor. Usually motors don't go bad though.

If it sounds a lot more quite, and won't shoot, it's probably jammed. Use an unjamming rod to unclog it.

If it's none of these, it's probably a gearbox probably. Send it in to a reliable tech to fix it.

it depends on the size and the fps (feet per second) if the fps is lik 50 its probly likr 97 cent but if it is 250 it is about 150 dollars but if it is 350 or 400 it is about 300 or 400 dollars

It depends on if it is a mid or high cap magazine. Their are also low caps that are used for military purposes, they hold 30 rounds and are not meant for recreational or professional airsofters. Do not use them! Mid caps hold 120 rounds. High caps hold 350 rounds. Both of those numbers are specific to m16 btw. You can also get drum mags the can hold 2500 round and you can get them to be both manual wind and a battery powered wind.

in the scope its a slide on the top put the scope on the gun aligned with the hole in the gun and scope then pour bbs into the scope

I don't think they are neccesarily illegal. I would check with my local law enforcment to find out what the laws are locally before you purchase on of these guns. I know a great place that ships internationally. It's called Airsplat.com. They ship to Canada often, from what I hear. Also, they have great prices and specials for their Items. Take a look and if you have any questions, give them a call. Their Customer Representatives are very knowledgable on basic Airsoft informationa and would be able to give you more information on shipping or whatever else you're curious about.

Airsoft guns mainly shoot 6mm plastic BBs. Lightweight or cheap BBs may shatter on impact. There are many different weights for BBs which normally range from .12g or .48g. BBs can also come in different colors which allow for different functions. Black BBs, normally the main choice for mil-sim players because neither the shooter or the target can normally see the BBS. This is pretty much the same case with all dark BBs. White BBs allow for the shooter to easily see his or her BBs and so can the target, allowing the shooter to adjust his shot and the target to dodge the BBs. There's also glow in the dark BBs, which will glow with the aide of a tracer suppressor. Many mil-sim players who are conducting an operation at night load 4 black BBs then one tracer BB, and repeat the process. For daytime use, they load 4 black BBs then a white BB. Airsoft guns also shoot 8mm BBs, though this is very uncommon and mainly used in 40mm grenade launcher (basically an undermounted shotgun designed to look like an m203 launcher and grenade) rounds so that there is the best chance of hitting a target.

It can certainly damage the eye enough that it no longer functions.

Well it could make you bleed (depends what you have on) and it will leave a welt for 5 days or longer but yea it hurts! (I know because I play airsoft)

It is the "organ" I guess you could call it, that makes the airsoft gun work. Inside, there are many parts:

- Cylinder

- Cylinder head

- Piston (and piston head)

- Spring

- Spring guide

- Tappet plate

- Air nozzle

- 3 gears (sector, spur, and bevel)

- Anti-reversal latch

- Trigger assembly

- Wires to battery

- Wires to motor

the best way to lower the fps on a sniper rifle would be to reduce the type of spring you are using. airsplat.com has a whole bunch to pick from to decide what type of FPS you're looking for.