How big is Paris in terms of area?
The city itself is 105 square kilometres; the urban area 2 723 km2.
How do you find the square foot of a pool that measures 62 feet around and 5 feet deep?
You can't, without knowing either the length or width, and anyway I think you're looking for volume/capacity which is measured in cubic feet.
Imagine a square. It has four identical (equal) sides. If this side is 1 metre, it means that the square is 1 sq metre (If the side is two metres - 2X2 = 4 sq metres)
How do you convert millimeters to sq feet?
You do not. A millimetre is a measure of distance, whereas a square foot is a measure of area. The two measure different things and, according to the basic principles of dimensional analysis, conversion from one to the other is not valid.
How much wallpaper do you need to cover 102 feet?
I would say that 102 feet of wallpaper would do the job.
How many yards of top soil will you need to cover an area of 12 feet x 6 feet x 1 foot?
Volume = (12' x 6' x 1') = 72 cubic feet = 22/3 cubic yards
What is 7 ft 19 in in square feet?
Nothing.
The first is a measure of length or distance while the second is a measure of area. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.
How much earth can be removed from a hole three feet wide two feet deep and six feet long?
36 cubic feet None, unless you want to make the hole bigger. However, as someone who's just dug a hole and was amazed at how many rubble bags I needed to fill to get rid of it. It certainly feels like more than the maths would suggest.
I have heard that earth expands as it's removed as it's no longer under pressure so you can assume a 40% greater volume once it's out of the ground. So in pure terms it's 36 cubic feet, but if you're digging your garden, allow for more.
Frizzboo123 says: Earth Can't Be Removed From A HOLE.
How many square meters are there in 9 lineal meters?
None, since there can be no conversion.
A linear (or lineal) metre is a measure of length in 1-dimensional space. A square metre is a measure of area in 2-dimensional space. The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.
How do you convert inches to millimetres?
There are 25.4 millimetres in one inch. Therefore, to convert between millimetres and inches, divide by 25.4. For example, rounded to two decimal places, 640 millimetres is approximately equal to 640/25.4 = 25.20 inches.
How many pavers do you need for 30 square feet and pavers are 6x3?
6 inches x 3 inches = 18 square inches 18 sq/in = .125 sq ft 30 sq ft / .125 sq ft = 240 pavers NOTE: You should allow extra pavers as a "fudge factor".
What is the number of square feet in 10 square yards?
There are 9 square feet in a square yard, so 10 square yards equal 90 square feet
How do you convert inches to square meters?
Multiply square inches by 0.00064516 to get square meters.