Area

Just multiply them together and you get you answer = 1125 sq metres

6 feet =

-- 1,828.8 millimeters

-- 182.88 centimeters

-- 1.8288 meters

-- 0.0018288 kilometer

(all rounded)

P = 28cm

1 furlong = 10 chains

1 acre = 1 furlong x 1 chain

= 1 furlong x 0.1 furlong

= 0.1 sq furlong.

Answer: 4x4 = 16 or 8x2feet = 16 etc it could be either of these answers

Answer: There is no single solution. Pick any number greater than zero for one of the sides; then divide 16 by that number to get the other side.

3.5 yards x 3 ft/yard = 10.5 feet

This question cannot be answered sensibly. A cubic foot is a measure of volume, with dimensions [L3]. A yard is a measure of distance, with dimensions [L]. The two measure different things and basic dimensional analysis teaches that you cannot convert between measures with different dimensions such as these without additional information.

None, since there can be no conversion.An inch is a measure of length in 1-dimensional space while a square foot is a measure of area in 2-dimensional space. The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.

718,289 square miles in Indonesia

a yard is 3 feet and a square yard is 3 x 3 = 9 sq ft

4 sq yds = 4 x 9 = 36 sq ft

A foot is 0.3048 meters. So that would give you 137.79 feet.

20 x 3 = 60 square feet.

Assuming you mean area, we have 20(36) = 720 ft2.

However, if you meant distance, both have 0 ft2, since distances do not account for area.

One acre is 0.004 square kilometers, so 166 square kilometers would be 41,500 acres.

18 feet x13 feet is ~21.7 square meters.

No. 1550 sq inches.

0.8 ft x 0.8 ft = 0.64 ft2 (sq ft)

100x150 = in sq ft.

None.

A centimetre is a measure of length in 1-dimensional space while a square centimetre is a measure of area in 2-dimensional space. The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.

Assume the units for 6's are feet.

First, determine the area of each tile, using the area of the square.

A = s²

= (6 ft)² = 36 ft²

Divide 60 ft² by 36 ft² to get approximately 2 tiles [Even though you won't be able to fit the tiles into that much area! You need to slice the portion of the second tile and include it for the amount of spacing you want to add for the flooring.]

<><><><><>

Second assumption: 6 x 6 means 6 inches by 6 inches

This means you need 4 tiles per square foot, so 60 square feet needs 240 tiles. In practice, the edges of the area don't line up with the area's perimeter, so you might need more than 240 and you might need to cut some.

5ft x 4ft = 20ft2

They are units of measurement of area.

Cannot be done without knowing the composition (most importantly the density) of the sand