Area

Cubic feet is a measure of volume in three dimensional space. In the case of a room that requires measures of the length, width and height of the room - that is, three measures. Only two are given in the question and so it cannot be answered.

(952 sq ft x 144sq in/sq ft) /(13x13 sq in) = 811.17 tiles

They are units of measurement of area.

Assume the units for 6's are feet.

First, determine the area of each tile, using the area of the square.

A = s²

= (6 ft)² = 36 ft²

Divide 60 ft² by 36 ft² to get approximately 2 tiles [Even though you won't be able to fit the tiles into that much area! You need to slice the portion of the second tile and include it for the amount of spacing you want to add for the flooring.]

<><><><><>

Second assumption: 6 x 6 means 6 inches by 6 inches

This means you need 4 tiles per square foot, so 60 square feet needs 240 tiles. In practice, the edges of the area don't line up with the area's perimeter, so you might need more than 240 and you might need to cut some.

None.

A linear metre is a measure of distance while a square metre is a measure of area. The two measure different things and it makes no sense to try to convert form one to the other.

Using Imperial measure, 1 Imperial gallon is 0.16 (0.160544) cubic feet.

248 feet

The answer will depend on what is being estimated: the cost of replacement, the mass, the area, the amount of glass, the amount of solar gain, ... The list could go on but since the question does not specify what is to be estimated, the answer can go no further.

None.

A cubic metre is a measure of volume in 3-dimensional space, whereas a square metre is a measure of area in 2-dimensional space. The two measure different things and, according to the basic rules of dimensional analysis, conversion from one to the other is not valid.

3.28 fett

You can often find boxes at the liquor stores

By population it is Los Angeles County, California (10 million +) and by area it is San Bernardino County, California (21,000 square miles).

The largest "county equivalent" by area is Yukon-Koyukuk Census Area in Alaska (147,805 square miles). It is part of Alaska's Unorganized Borough and has no county seat. Its population is less than 6000.

It is pi*r^2*h where r is the radius, and h is the height, with both expressed in yards.

One acre has 43,560 square feet. Divide the number of square feet by that and you get the number of acres. This gives you an answer of .154 acres.

None. You need a second dimension to calculate square meters.

1 square foot = 144 square inches.

To convert from square kilometers to square inches, multiply by 1.55E+09.

This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area.

None. You cannot convert linear measurement in to an area measurement without another dimension.

1,696 square feet = 157.6 square meters.

you can't. they're different units

30 inches by 5 feet = 12.5 square feet.

Vatican City (.17 miles^2)

Montana has total area of 147,040 square miles which includes 145,546 square miles of land. The U.S. Census Bureau reported that the estimated population in Montana was 1,042,520 as of July 1, 2016.

1,296 square inches are in nine square feet.