Area

If each of those numbers represent a measurement in centimeters, just multiply the three numbers. The result will be cubic centimeters, though, not square centimeters.

If each of those numbers represent a measurement in centimeters, just multiply the three numbers. The result will be cubic centimeters, though, not square centimeters.

If each of those numbers represent a measurement in centimeters, just multiply the three numbers. The result will be cubic centimeters, though, not square centimeters.

If each of those numbers represent a measurement in centimeters, just multiply the three numbers. The result will be cubic centimeters, though, not square centimeters.

128 cubic feet

The ratio is 8:3. Its value is 2.6667 (rounded, repeating).

9600 (square meters) = 103,333.54 square feet.

There are 0.0254 metres in one inch. There are 12 inches in one foot. Therefore, 9 feet 2 inches is equal to (9 x 12 x 0.0254) + (2 x 0.0254) = 2.794 metres.

It is approx 4583189132 miles. However, the apparent accuracy of the measure is extremely dubious.

No.

21/32 = 7/8

Leadville, CO is quite small, covering only 1.1 sq miles (2.849 km²).

1763.47506529 square feet

This question cannot be answered sensibly. A square metre is a measure of area, with dimensions [L2]. A metre is a measure of distance, with dimensions [L]. The two measure different things and basic dimensional analysis teaches that you cannot convert between measures with different dimensions such as these without additional information.

204 square inches is 1,316.13 square cm

1. Alaska
2. Texas
3. California
4. Montana
5. New Mexico.

17.3 km2 (6.7 sq mi).

There are 27,880,000 square feet in one square mile.

259,000 square miles is 670,806.9 km2

2048

6 square feet

A square foot is a measure of area in 2-dimensional space. The fact that there are four numbers given in the question suggests that the shape is a quadrilateral of some sort. Unfortunately, the lengths of the sides of a quadrilateral are not sufficient to uniquely determine its shape. A quadrilateral is not a rigid shape and it can be "squashed" so that its area reduces to 0.

Also, there is no indication as to whether the numbers given are inches, feet, miles or something else so even if the shape were rigid, it would be impossible to give the area in square feet.

24 x 24 = 4 sq ft so 513/4 ie 128¼

If the diameter is 1.417, then the radius (r) is half that, or 0.7085. The area is r times itself, times pi, or about 1.577.

No answer is possible with the given information. It depends on the size of each
table, whether they are opened or stacked, whether there is any space allowed
between them, etc.

15 ft x 5280 ft = 79,200 sq ft = 1.8181.. acres.

12" x 8" = 96 square inches