Area

I'll presume that you meant "tiles" and the math answer is 228.25 title. Determined as follows: 16" X 16" = 256 sq. inches. There are 144 sq. inches in 1 square foot (12X12). 256 divided by 144 = 1.77 sq. feet. So one 16" by 16" tile covers 1.77 sq. feet. 404 sq. feet divided by 1.77 = 228.25. (Manufact. rate their tiles between 1.7222 & 1.775 because they are usually not precisely 16X16) Now from a contracting point of view this does not taken into account the grout joints that usually exist between each tile, the size of which is up to you, which would increase the surface area that each tile covers when grounted in place, which would reduce the number of tiles. It also does not it take into account breakage or waste which would increase the number of tiles. Most rooms don't allow for the use of only full tiles so you have to cut full tiles leaving some waste. Also tiles sometimes break in the box and when you try to cut them. To play safe if you are looking to buy tile I'd buy a minimum of 250 tiles. Most suppliers allow you to return any un-used cases, so always buy extra. If this is your first tiling job I'd buy even more. Good luck

360 sq metres = 3875 sq feet, approx.

if 36 is the area it already is square inches.

A route is a path along someone or something travels from departure point to destination. It would make no sense to express this in square meters. You measure a distance in meters or kilometers. Square meters are for an area. For example, my room is 5 meters long and 3 meters wide, so it is 15 m2 (square meters).

In absence of the square root sign, you can write out the square root of expression x using the power form, x1/2 (that's x to the power of one over two).

The answer depends on the units used for the measurements given in the question.

24.08 square meters.

Metres are a length or distance measure and square feet are an area. One cannot be converted to the other.

a cubic foot=7.4805195 gallons

The largest natural lake in the world measured in square miles is the Caspian Sea. It is 143,200 square miles and is located between Asia and Europe.

It can't be done. Inches are linear, square inches measure area.

No comment, answer please.

A cube with edges 300-ft long has a total surface area of 540,000 square ft. That's 60,000 square yds in case you have to carpet it.

Answer: 130000 ft² = 12077.395 m²

16.66 yards.

3281 feet

1000 m = 1 km

→ 17 m = 17 ÷ 1000 km = 0.017 km

Since both terms are in the same units, acres, then you simply divide 1.4 by 0.24 to get about 5.83 times.

21 (20.25)

121 metres squared

391 square feet. Just multiply length by width - the answer is the square footage.

Break the area into squares, rectangles and triangles and add together.

An irregular pentagon.