Area

1,175 square yards = 0.24 acres.

43,560 square feet = 1 acre 11,000 square feet = (11,000 / 43,560) = 0.2525 acre (rounded, repeating)

Feet is a measurement of length and acres is a measurement of area so they cannot be directly converted. If you have a rectangular area and you know the length and width in feet you can multiply these two values together to get the area in square feet. Since square feet is an area measurement you can convert this to acres by dividing the square feet by 43560 or use the calculator found here: http://www.metric-conversions.org/area/acres-to-square-feet.htm Not sure what you mean but an acre is 43560 square feet

1 sq mile = 640 acres so 5 million acres = 7812.5 sq miles

It's impossible to tell without knowing at least one of the sides of the room. However, 784 happens to be the square of 28 (28 x 28 = 784), so I will suggest that as the answer.

To determine the number of cubic feet of sand in square feet, you would need to know the depth of the sand in feet. Once you have the depth, you can multiply the area in square feet by the depth in feet to calculate the volume in cubic feet. This is done by using the formula Volume = Area x Depth.

One hectare equals 2.47 acres. Therefore a half a hectare equals 1.235 acres or a little less than 1-1/4 acres.

There are 15 (12-inch by 12-inch) squares in 15 square feet. Each square foot consists of 144 (12-inch by 12-inch) squares. Therefore, 15 square feet would contain a total of 2160 (12-inch by 12-inch) squares.

Jamaican patios are small front porches on some buildings in Jamaica, just like patios in the United States. They are like balconies, you place chairs upon them and sit there.

Jamaican <i>patois</i>, however, is the language spoken in Jamaica alongside English, and it originated from a mixture of realizations of English words and West African languages. This is so because Jamaicans are the descendants of Africans who were taken there by Europeans as slaves some three hundred years ago.

.43 acres = 18,730.8 square feet.

131,812.56 ft2

The area of a room that is 2200 square feet is its length multiplied by its width. For example, if the room is 40 feet long, then the width would be 55 feet (2200 sq ft ÷ 40 ft = 55 ft).

An acre is 43,560 sq feet. 8100 sf equals .186 of an acre or slightly less that 1/5 of an acre

To convert square feet to acres, you need to divide by 43,560. So, 200 x 650 feet is 130,000 square feet. Dividing 130,000 by 43,560 gives you 2.984 acres.

There is no whole unit that will answer your question. One Square Mile = 640 acres One Square Mile = 260 Hectares (not 160). There is no unit which equals 4 acres (which would be the answer you are looking for). A scotts acre (or scottish acre) is equal to 1.3 common acres - but again that doesn't add up to what you are looking for.

You cannot walk 0.03 acres, and acres can't be converted to miles.

"Mile" is used to measure a length or a distance, like a piece of rope or a trip to the store.

"Acre" is used to measure area or coverage, like a rug or a plot of land.

These two units are used to measure completely different things. They have different

physical dimensions, and they can't be converted into each other. That would be like

trying to convert your age into gallons.

216 cubic feet = 8 cubic yards.

Since square feet is a measure of area, and inches is a measure of length, there is no direct conversion between the two. However, if you are looking to convert 1000 square feet to square inches, you would multiply by 144 (since 1 square foot is 144 square inches), giving you 144,000 square inches in 1000 square feet.

Yunnan province in China covers an area of approximately 148,000 square miles.

There are 640 acres in 1 square mile.

Hope this helps

metric system works in 10s 100s or 1000s here is a rough overview

10 mm equals 1 centimetre

100 centimetre equals 1 metre also 1000 millimetres equals 1 metre

1000 metres equals a kilometre

the metric system also works on volume as well 1 cubic metre equals 1000 litres

10 cms cubed is 1 litre

Hope this helps

try wikipedia site

http://en.wikipedia.org/wiki/Metric_system

The area of land described would be 10 acres. To calculate this, multiply the width (330 feet) by the depth (1320 feet) to get the total square footage (435,600 square feet), and then convert that to acres (1 acre = 43,560 square feet).

135,000 square feet = 3.1 acres.