Area

Photovoltaic cells are variable but a standard 1.6 square-metre (18 square feet) cell as used on roofs in the the UK is rated at 220 Watts. For 3 kW you would need 14 of them.

When installed and switched on in strong sunlight they would produce 3kW that is available to you to use, but, if you don't happen to use as much, the excess power goes back into the supply network, and the result is that your local power station will produce that much less electrical power. The boiler will be told (automatically) to throttle back and produce less steam, so it will consume fuel more slowly and send CO2 up the exhaust pipe at a lesser rate.

So your solar panels produce an immediate reduction in CO2 emissions, because the energy used in everyone's house has to be generated at the instant it is used.

There are 43,560 square feet in one acre. Therefore 0.71 acres is equal to 0.71 x 43,560 = 30927.6 square feet.

Linear is a straight line measurement and square feet requires a length and width.

1 yard = 3 feet = 36 inches

1/4 yard = 3/4 foot = 9 inches

One acre is equal to 43,560 square feet. Therefore, one sixth of an acre is equal to 43,560 / 6 = 7,260 square feet.

1600 square meters can be multiplied by the square of 3.28 feet per meter which will be in square feet per square meter. Divide this by 43560 square feet per acre to get the acreage. The units will guide you along.

meters2 . (feet2/meter2) / (acres/feet2)

1 cubic meter of pure water weighs 1 metric tonne.

Consult the book "Econometric Theory and Methods" by Davidson and MacKinnon. It talks about how to drop a perpendicular array onto a plane. That is the basic problem we are facing here. 1.5 cubic feet is a three dimensional measure, square feet is a two dimensional measure. I will make the following assumption: 1) You have not gone to high school 2) You will believe whatever I saw 3) The dimensions of the three dimensional space you have are 2 by .75 by 1. Where each measurement corresponds to length, width and heigh respectively. To solve this problem we project the space downwards onto the plane. Now if this space is not a cube as I have assumed, we will need to account for particle drift. Of course this is not the case as you would have surely mentioned this in your question. So by projecting it straight down, we are basically removing the height measurement. So 1.5 cubic feet under these assumtions is equal to 1.5 square feet.

1kg = 2.204 lbs therefore 1 lb = 1/2.204 kg = 0.454 kg

1.25 cubic feet - 77 cubic feet = -75.75 cubic feet.

There are 3 feet in one yard. 480 / 3 = 160 yards.

There are about 809.37 hectares in 2000 acres.

An acre is about 0.404 hectares. A hectare is about 2.47 acres.

Yes, a 6 ton air conditioner should be able to cool a space of 2700 square feet assuming the space has good insulation and minimal heat-producing appliances. It's recommended to consult with an HVAC professional to ensure the unit is properly sized for the specific needs of the space.

Divide 4,043.24 by 3 to get the answer, which is 1,347.75 sq yards.

26,000,000 cubic yards = 0.004769 cubic mile (rounded)

Acres are a measure of area, not length - so acres are a measure of square miles, not miles.

To two significant figures, 0.3 acres is equal to 0.00047 square miles.

There are 157.48 inches in 4 square meters,

THANK YOU very much and you really have to learn how to convert thing to make them a different unit.

* * * * *

The above answer is pure rubbish.

You cannot convert square metres to inches because square metres are a measure of area whereas inches are a measure of distance. The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.

Metres can be converted to inches: multiply by 39.3701

and

Square metres can be converted to square inches: multiply by (39.3701)2 = 1500.00315

Square meters are a unit of area, measuring two-dimensional space, while cubic meters are a unit of volume, measuring three-dimensional space. To convert square meters to cubic meters, you need to have a third dimension such as height or depth for the conversion. If you have the height or depth measurements, you can multiply the square meters by the height or depth to get the cubic meters.

1,200,000 square feet = 27.55 acres.

To find the length of a square with an area of 102.5 square inches, you would take the square root of 102.5, which is approximately 10.12 inches. This means that a square with an area of 102.5 square inches would have sides that are 10.12 inches long.

1 acre = 43,560 square feet

A 12,000 BTU split air conditioner is typically recommended for areas up to 550-650 square feet. To cool a 1,000 square foot area effectively, you may require a larger unit or additional cooling sources. It's best to consult with an HVAC professional to determine the appropriate size for your space.

0.87 acres = 37,897.2 square feet.

There are 4840 square yards in an acre, so if you have 10 acres, the total yards would be 48,400 square yards.